Supported Paragon Ii Cims And Configurations - Raritan Dominion KX III Administrator's Manual

Supported Paragon II CIMS and Configurations

KX III
When you access the Paragon II system from KX III or CC-SG (if the KX III
is managed by CC-SG), the Paragon II OSUI login screen appears for you
to log in.
In this integration, you can perform any OSUI functions implemented
with current Paragon II firmware or any KX III function implemented with
current KX III firmware except for the virtual media feature.
When accessing the Paragon II OSUI through KX III, DO NOT attempt to
synchronize the mouse manually. A mouse is not necessary on the OSUI
screen and mouse synchronization will delay the keyboard response for
seconds.
Supported Paragon II CIMS and Configurations
See
additional information.
The KX III supports the P2CIM-APS2DUAL and P2CIM-AUSBDUAL CIMs,
which provide two RJ45 connections to different KVM switches.
Support of these CIMs provides a second path to access the target in the
event that one of the KVM switches is blocked or fails.
Paragon CIM Supports
•
P2CIM-APS2DUAL
•
•
•
Appendix B: Accessing a Paragon II from the KX III
Servers with IBM
®
PS/2-type keyboard
and mouse ports
Automatic skew
compensation (when
the CIMs are
connected to Paragon
II, not from a KX III)
Intelligent Mouse
mode
Standard Mouse
mode
(on page 405) for
Does not support
• Virtual media
Smart cards
•
Absolute Mouse
•
mode
• Use with blade
chassis
Cascaded KVM
•
configurations
405