Changing Shared Folder - Fujitsu ETERNUS DX60 Operation Manual

-
If Active Directory is configured as an authentication server:
Enter the user name and password registered to Active Directory.
When connecting from the client participating in Active Directory, authentication is not needed.
-
If an authentication server is not set up:
Enter the user name and password described in the ETERNUS Disk storage system manuals.
Information
Entering the IP address for NAS interface in the address bar can view sharable folders.
Access Using NFS Protocol
The shared folder is accessible by performing the NFS mount from a UNIX server using the following procedure:
When authenticating through LDAP, there is no difference in operation method with the presence of setup of an authentication server.
Make the UNIX server participate in the LDAP domain to perform the NFS mount.
1.
Check the NFS export path for the shared folder.
The NFS Export Path displayed in the Basic tab of the Detail Shared Folder screen is the shared folder path.
Refer to "Display Shared Folder" in the
Shared Folder screen.
2.
Log in to the UNIX server with administrator privileges.
3.
Execute the mount command to mount the shared folder.
When executing the mount command, specify the following:
For Solaris
mount -F nfs nasInterfaceIpAddress:nfsExportPath mountDestinationDir
For Linux
mount -t nfs nasInterfaceIpAddress:nfsExportPath mountDestinationDir
Information
-
Executing the showmount command on the UNIX server can view NFS mountable shared folders.
showmount -e nasInterfaceIpAddress
-
nfsExportPath is as follows:
The format for the
/mnt/nas/nvnasVolumeNumber/data/sharedfolderName
After NFS mounted, logging in to the UNIX server as the user registered to LDAP can access the shared folder with the owner/group
permissions set to the shared folder.
When not authenticating through LDAP, logging in to the UNIX server can access the shared folder.
4.6.4.2

Changing Shared Folder

The values of the shared folder will be changed. The values that can be changed are as follows:
-
Oplocks Configuration (when the protocol is CIFS or both CIFS and NFS)
-
Data Access SMB Encryption (when the protocol is CIFS or both CIFS and NFS)
-
Enumeration Based on Access Permission Settings (when the protocol is CIFS or both CIFS and NFS)
ETERNUS SF Web Console Guide for the procedure to display the Basic tab of the Detail
- 58 -