Restore; Sdv Operations; A.3.2 Restore - Fujitsu ETERNUS DX60 Operation Manual

Stop
When the SnapOPC+ session is stopped, the copy-on-write process terminates and all the data saved in the SDV is lost.
If there are older SnapOPC+ sessions than the SnapOPC+ session to stop, it cannot be stopped. Such a SnapOPC+ session can be stopped
by using the force option. However, the Stop operation with the force option stops not only the specified SnapOPC+ session but also
all the older SnapOPC+ sessions.
A.3.2

Restore

Restoration requires the SnapOPC+ copy destination be mounted by the OS and the target data restored using normal file copying.
Note
Restoration by the SnapOPC+ cannot be performed for ETERNUS DX60/DX60 S2/DX80//DX90.
For the restoration, mount the copy destination volume and copy each file on the operating system.
A.3.3

SDV Operations

- 94 -