Ni Labview Signalexpress Limited Edition; Ni-Dmm Instrument Driver; Ni-Dmm Examples - National Instruments NI PXI-4060 Getting Started Manual

NI LabVIEW SignalExpress Limited Edition

NI-DMM 2.7 and later includes a stand-alone, evaluation version of NI LabVIEW SignalExpress that
allows you to quickly configure your NI hardware to acquire, generate or perform hardware comparison
using your DMM. LabVIEW SignalExpress LE gives you a 30-day trial of the Full Edition of LabVIEW
SignalExpress. After that period, you must activate your version of LabVIEW SignalExpress LE, which
is free, or purchase the Full Edition. If you activate your version of LabVIEW SignalExpress LE before
your 30-day trial of the Full Edition is complete, the full features are still available for the remainder
of your 30-day trial.

NI-DMM Instrument Driver

NI-DMM features a set of operations and attributes that exercise all the functionality of the DMM,
including configuration, control, and other module-specific functions. NI-DMM controls all NI digital
multimeters.
Refer to the Programming section of the NI Digital Multimeters Help at Start»All Programs»National
Instruments»NI-DMM»Documentation»NI Digital Multimeters Help for information about using
NI-DMM in your applications.

NI-DMM Examples

The NI-DMM examples are instructional tools that demonstrate some of the functionality of the DMMs
you can use or integrate into your systems. NI-DMM includes examples covering single point
measurements, multipoint measurements, triggering, waveform acquisitions (NI 407x only), and
performance (NI 407x only).
Tip For best accuracy, NI 407x users should run the Self-Cal example after the DMM has been
installed and has warmed up.
Refer to the Examples section of the NI-DMM Readme file at Start»All Programs»National
Instruments»NI-DMM»Documentation for a complete example list. Refer to
for examples that use National Instruments DMMs with National Instruments switch modules.
LabVIEW and LabWindows/CVI users can use the NI Example Finder to search or browse examples.
NI-DMM examples are classified by keyword, so you can search for a particular device or measurement
function.
To browse the NI-DMM examples available in LabVIEW, launch LabVIEW, click Help»Find
Examples, and navigate to Hardware Input and Output»Modular Instruments»NI-DMM
(Digital Multimeters).
To browse the NI-DMM examples available in LabWindows/CVI, launch LabWindows/CVI, select
Help»Find Examples, and navigate to Hardware Input and Output»Modular Instruments»
NI-DMM (Digital Multimeters).
NI Digital Multimeters Getting Started Guide 22
ni.com/zone
ni.com