Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Innokin Technology COOLFIRE ULTRA
Summary of Contents for Innokin Technology COOLFIRE ULTRA
- Page 2 CoolFire ULTRA Unique Authoriza�on number. 2) Visit: h�p://www.innokin.com/verify-device/ 3) Enter the Unique Authen�ca�on number in the Authen�ca�on field. 4) Verify your CoolFire ULTRA is a genuine Innokin Vaporizer. If you have any ques�ons or sugges�ons, please write to us at support@innokin.com.
- Page 3 WARRANTY INFORMATION: children, women who are pregnant or breas�eeding, or persons with or at risk of Innokin Technology provides a 90 day a�er heart disease, high blood pressure, diabetes sales service warranty to all authorized or taking medicine for depression or asthma, vendors.
- Page 4 pleasure, do not allow the ba�ery power level 3. This product is only designed to be used with to drop below 2 bars. When the ba�ery high quality e-liquid. Please check with your power level drops to 1 bar the device should e-liquid provider.
- Page 5 OPERATION GUIDE: 5V 2A USB wall charger (CE/UL Cer�fied) 18. The product is not designed for use with a The CoolFire ULTRA has three bu�ons: “ ” car charger, the produtc does not come Power bu�on, “+” bu�on and “-” bu�on.
- Page 6 filled with eliquid and a�ached correctly. There To POWER OFF the CoolFire ULTRA: must be eliquid in the tank before you power When the CoolFire ULTRA is not in use, click on & ac�vate the device. Do not dry burn the the power bu�on “...
- Page 7 If a coil has been heated then it correct coil type. must be cooled down to room temperature The CoolFire ULTRA will only use Temperature before calibra�on. Eliquids should be room Control with Ni200, Titanium, Stainless Steel temperature for accurate calibra�on, if an eliquid 316 coils or use Wa�age;...
- Page 8 W(Wa�age Mode). The top le� corner will If there is insufficient eliquid in the coil, or if display the coil type. Release the bu�ons to the coil is not primed, the CoolFire ULTRA select the correct coil type. output will drop to a low wa�age temperature maintenance mode.
- Page 9 ” bu�on to set the RampUp Adjust Variable Wa�age: wa�age. When the CoolFire ULTRA is in variable wa�age Flavor and vapor produc�on will change mode press and hold the “+” or “-” bu�on and depending on your selec�on; this allows you the set wa�age will flash.
- Page 10 Remember last Temperature or Wa�age se�ng: The CoolFire ULTRA features automa�c real-�me When the CoolFire ULTRA is turned off it will atomizer Ohms detec�on. If the resistance of the remember the current temperature or wa�age atomizer is lower than 0.07Ω, the LED will light...
- Page 11 How to refill the SCION Tank (NOT INCLUDED How to charge the CoolFire ULTRA To charge your CoolFire ULTRA connect your micro IN EXPRESS KIT) USB charging cable to the charging port of your 1) Twist the top cap off.
- Page 12 CAUTION: Make sure there is no e-liquid in You will know when the atomizer coil should be replaced when you begin experiencing less the tank before replacing a coil. performance and taste from your clearomizer. Important: When a new clearomizer coil is used, large Always take care when handling e-liquid.
- Page 13 Technical Specifica�ons Ba�ery: 4000mAh Standby current: 200uA max Maximum output Wa�age: 150W Maximum output Current: 36A Maximum working Current: 30A Maximum output Voltage: 7.5V Atomizer Resistance: 0.1Ω (Minimum) Temperature Control Mode:Ni (0.1-1.0Ω), Ti (0.1-0.5Ω), SS 316L (0.2-0.5Ω) coils are recommended. Important: Temperature Control is only available with T.C.
Need help?
Do you have a question about the COOLFIRE ULTRA and is the answer not in the manual?
Questions and answers