Table of Contents
Related Manuals for Innokin Technology itaste mvp
Summary of Contents for Innokin Technology itaste mvp
- Page 1 INNOKIN ITASTE MVP USER MANUAL • Size: 41*22*107mm • Battery Capacity: 2600mAh • Operating Voltage: 3.3-5.0 V • Charing Time: 3.5H-5.5H • Amp limit – 3.0 Amps • Colors: Silver, Titanium Blue ,Black http://www.sfumando.it/itaste-mvp/...
- Page 2 http://www.sfumando.it/itaste-mvp/ OPERATION To turn the device on you must press the power button times. There are three LED’s embedded within the power switch – when the device is turned on they will light up in this sequence: From this point on whenever you press the power button the device will power the attached atomiser and the following LED will light whilst the button is pressed: As the battery voltage gradually lowers through usage eventually the following LED will light when you press the power button:...
- Page 3 http://www.sfumando.it/itaste-mvp/ To turn the device – you must Press the power button in quick succession times and the green LED will flash twice and the unit will shut down. THE VV DISPLAY. When first unpacked the mirror finish Display panel will have a plastic screen protector – you may choose to remove this –...
- Page 4 http://www.sfumando.it/itaste-mvp/ Until the voltage setting is displayed pressing of either the will have NO effect. Once voltage is displayed you may adjust the voltage up or down using the 0.1 V steps from 3.3V up to 5V. The voltage setting do not cycle continuously – once you have reached 5V the only way to adjust back down is to use the V- button and vice versa.
- Page 5 http://www.sfumando.it/itaste-mvp/ Note a state of complete discharge need not be achieved before charging can take place – the unit can be charged when just the orange light displays during operation and charge time will likewise be considerably shorter as a result. It is recommended however that even though Lithium Ion Polymer batteries do not suffer from memory effect -- the occasional complete discharge and lengthy charge is advisable to keep the internal battery optimised to its fullest.
- Page 6 http://www.sfumando.it/itaste-mvp/ ATOMISER CONNECTIONS. The device is able to be connected with no issues to the following types of atomisers: • CE4 • CE5 • eGo • VIVI NOVA • 510 (all types) It should be noted though that certain atomisers which are capable of being fitted to an EGO threaded connection will not be able to be used on this device unless a 510 to EGO adapter is used –...
- Page 7 http://www.sfumando.it/itaste-mvp/ A plinth or sleeve is provided to tidy up the appearance of atomisers that use a 510 connector and have a large diameter body along with CE type atomisers to balance out the appearance of the device – for example.
Need help?
Do you have a question about the itaste mvp and is the answer not in the manual?
Questions and answers