Aiphone GT-1M3 Operation Manual

This operation guide describes the basic
functions of your GT Series Tenant Station
For a complete operation manual (3.71 MB), scan QR code or use link to download
it from the manufacturer's website:
Power Source
This tenant station is
powered by the system
and will always remain on,
even when the screen is
off. Contact the building
manager if the tenant
station in this residence
is not working.
LCD Screen
Door Release Button
Push the door release
button to unlock the
entrance during a call.
Adjust Button
Push the adjust button to compensate
for low or bright backlight conditions
when viewing video from a door station.
Zoom / Wide Button
Push the zoom / wide button
to change the screen view.
www.aiphone.com/gt-1m3_op-man
Microphone
Speaker
QR Code
Place
Holder
Status Indicator Light
Option Button
Push the option
button to activate
an external device
(if included).
Guard Button
Push the guard button to
call all guard and concierge
stations connected to the
system (if included). To view
a visitor on a CCTV camera
(if enabled), push the guard
button while in communication
with the entrance station.
GT-1M3 Tenant Station
Use the
LCD Screen
dial to
Brightness
adjust the
Control
LCD screen
brightness
levels (0~10).
Volume
Control
Use the dial
to adjust the
communication
volume (0~10).
Chime Volume
Control
Use the dial to
adjust the chime
volume (0~10). The
status indicator light
blinks slowly when
the chime is muted.
Talk / Off Button
Push the talk / off button
to answer an incoming
call. Once answered,
conversation becomes
hands-free. Push the talk / off button
again to end a call (this does not
turn off the station). For push-to-talk
(PTT) mode, push the TALK
button until a beep is heard. The
conversation then requires the TALK
button to be pushed and held while
talking and released while listening.
To end the PTT conversation, push
the TALK button one time without
holding (this does not turn off the
station). Whether the conversation is
hands-free or PTT, the talk indicator
light turns on while you speak and
will turn off while your visitor speaks.
GT-1M3 Operation Guide | 1 of 1
1 / 2017