I/O Modules - VeriFone MX 915 Installation Manual

MX 900 Series Installation Guide

I/O Modules

The MX 900 Series terminals use one of six I/O Modules to make the following
connections. See the following section for I/O Module Illustrations.
Note:
P/N M132-409-01-R
P/N M132-509-11-R
P/N M132-509-01-R
P/N M132-509-21-R
May 13, 2015
Use the Ethernet port on the I/O module only if the multiport cable is
not attached. Otherwise, use the Ethernet port on the multiport cable.
Terminal #
1
2
MX 915 3
4
5
6
1
2
MX 925
3
4
5
6
I/O Modules
Description
AUD, BERG ONLY, NO TAILGATE
PWR, AUD, BERG W/ TAILGATE,
ETH, USB OTG, COM 2
PWR, AUD, POE, USB OTG, USB
HOST, COM 1, COM 2
PWR, AUD, ETH, USB OTG, COM 1,
WIFI/BT
AUD, BERG W/ TAILGATE
PWR, ETH, USB HOST, USB DEVICE,
COM 2
AUD, BERG ONLY, NO TAILGATE
PWR, AUD, BERG W/ TAILGATE,
ETH, USB OTG, COM 2
PWR, AUD, POE, USB OTG, USB
HOST, COM 1, COM 2
PWR, AUD, ETH, USB OTG, COM 1,
WIFI/BT
AUD, BERG W/ TAILGATE
PWR, ETH, USB HOST, USB DEVICE,
COM 2
21
I/O Module P/N
132-601-00-R
132-602-00-R
132-603-00-R
132-604-00-R
132-605-00-R
132-606-00-R
132-601-00-R
132-602-00-R
132-603-00-R
132-604-00-R
132-605-00-R
132-606-00-R