Table of Contents
Advertisement
Installation & Operation Guide
OVERVIEW
LightPack LED controller delivers power and control to any Philips Selecon PL Wash
luminaire or Philips Color Kinetics Color Blast wash lights. Smart addressing technology
simplifies set up and allows users to quickly address any luminaire regardless of type. Users
set an address, select an operating mode and press a button to set up any connected luminaire.
Each output is configured to match the luminaire regardless of the number of colors the unit
supports and delivers exactly the right number of control channels needed. An intensity
channel set up option is also available to make your luminaires even easier to use and
program.
CAUTION: The LightPack LED Module is for use with specified LED luminaires
only. NOT FOR USE WITH SCROLLERS. For luminaire types, refer to
"SPECIFICATIONS" on page 9.
SIDE VIEW
END VIEW
1 - Heatsink
2 - AC Input Cable
3 - DMX 512 In
4 - DMX512 Thru/Out
5 - Focus / Bump Button (one for each luminaire port)
6 - Red and Green Status Indicators (one set for each luminaire port)
7 - Mode Settings (one 4-position DIP switch)
8 - DMX512 Address Setting (three rotary DIP switches)
9 - LED Luminaire Control Port (two each, power and data supplied)
4
1
3
4
2
Figure 1: LightPack LED Module Overview
LightPack LED Module
5
6
7
8
END VIEW
9
Advertisement
Table of Contents
