Video Configuration - Samsung Webthru SWC 306 User Manual

17
.
24
25
26
27
28
29
30
31
0
nd
* Masking on 32
Masking 32 bits means that all the 32 bits are network ID, and masking none means that all the 32 bits
are host ID. Therefore masking all the 32 bits or none means that the provided IP address itself is applied
with a command of 'Allow' or 'Deny'.
If you want to allow only the IP addresses from 192.168.1.61 to 192.168.70, you may set as bellows.
Default Policy
IP address
IP address
IP address
IP address
* The IP addresses in black squares can be any IP address of the sub-networks. In the first square,
192.168.1.60 to 192.168.1.63 is to be assigned. And in the second square 192.168.1.64 to 192.168.1.71 is to
be assigned.
(2) Image Encryption Mode
Administrator may restrict people to receive images from one's Webthru, even though people accessed it. If
'Image Encryption Mode' is enabled and a pin number is assigned, people have to key in the assigned pin
number to see image after accessing Webthru image viewers.
'Security Configuration' is a double-checking function to control accessibility, utilizing 'User Account
Configuration' at the same time.

7) Video Configuration

This page is to configure every channel with
various conditions.
(1) Video Channel Selection
To select which video channel to configure.
In the list, there are 6 video channels.
(2) Video Channel State Control
It is to determine which channels will be enabled to send image signals to the image viewer. If a channel with
an external source is disabled, no image will appear in the image viewer. However, if a channel without an
external source is enabled, the overall transmission speed will go down and no image will appear. To view an
image from an external source, the channel with the source must be enabled.
From the first bit to the 17
From the first bit to the 24
From the first bit to the 25
From the first bit to the 26
From the first bit to the 27
From the first bit to the 28
From the first bit to the 29
From the first bit to the 30
From the first bit to the 31
The 32
bit has the same effect as masking none, and in Webthru 0 instead of 32 is used.
192.168.1.60 Masking
192.168.1.60 Masking
192.168.1.64 Masking
192.168.1.71 Masking
th
bit
.
th bit
th
bit
th
bit
th
bit
th
bit
th
bit
th bit
st
bit
nd
bit
Deny
30
0
29
0
26
255.255.128.0
.
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
Policy Allow
Policy Deny
Policy Allow
Policy Deny
Webthru SWC 306 User's Guide