Programmable Auxiliary Functions; Display - Kenwood TK-285 Instruction Manual And User Handbook

Programmable Auxiliary Functions

The Auxiliary, A, B, C, and D keys can be
programmed with the auxiliary functions listed below.
Contact your dealer for details on these functions.
Note: Some of these functions cannot be programmed onto certain
keys. Ask your dealer for details.
• AUX A
• Conventional
• Dialing
• Emergency
• Home
• Key Lock

Display

displays the strength of received signals, the
output power (high or low), status numbers, and
received call types.
appears when a control channel is found. It flashes
SVC
while the transceiver is searching for a control channel.
flashes when you activate call diversion.
appears while there is data in the stack. It flashes
when there is new data in the stack.
duration timer, data messages, and the current
operating status of the transceiver.
8
•
•
•
•
•
SVC
MON
displays call addresses, the call
Network Select
None
Redial
Scrambler
Status/ Stack
SCN LO