4. Using the transceiver
4.4 Sychronization of the clocks
Prior to transfering data between the PC and the transceiver, it is
important to check that the date and time are sychronized between
both of them. See figure 4.1.1 and 4.1.2. If not, set them as described
in section 5.4. If this is not done, the date stamp from the sensor will
be incorrect, which can lead to difficulties in recording measurements.
Figure 4.1.2
Figure 4.1.1
Transceiver date/time
Windows date/time
properties menu
properties menu
37
1HSA 801 080-15en EXCOUNT-II Users Manual