3. Sensor installation
3.7 Installation of sensor alternative 4
Earth cable
Figure 3.7.1
Note! Resistive current measurement may not always be possible with
this special application.
The assembly of the components is generally as per section 3.4 alter-
native 1, except that the arrester is intended specifically for inverted
mounting. Furthermore, it may be necessary to mount the EXCOUNT-II
sensor "upside down" in certain cases, as shown in Figure 3.7.1. With
such arrangements, special precautions may be necessary to additionally
seal the battery compartment against water ingress.
29
1HSA 801 080-15en EXCOUNT-II Users Manual