Switching Or Combining Of Video; Selecting Source Video And Sound; Adjusting The Audio Level - Panasonic AG-HMX100P Operating Instructions Manual

Switching or Combining of Video

Procedures of switching or combining video are described
below.

Selecting Source Video and Sound

This section describes the procedure of selecting source
video and sound to be provided with effects or mixed on
this unit.
To select input sources
1
Allocate video and sound to eight channels of
input sources in the [AUDIO VIDEO] submenu
of the [SETUP] menu ( page 24).
2
Set [TYPE] to [AB] or [PRG/PRE] in the [BUS]
submenu of the [SETUP] menu ( page 27).
3
Press one of the A/PROG (or B/PRESET)
SOURCE 1/5, 2/6, 3/7, 4/8 buttons according to
the input source you want to select.
To select one of the input sources 5 to 8, press
the corresponding SOURCE button while
holding down the SHIFT key.
The pressed button is lighted.
To select internal video
1
Display any of the following internal videos
using the [INT VIDEO] menu:
Back matte video:
(
Color bar output:
(
Still picture or movie:
(
2
Press the A/PROG (or B/PRESET) INT button.
button is lighted and the currently selected one of
The internal video selected in Step 1 is called and
Checking (Previewing) Video and
Sound
ME PVW button:
the image currently being switched (
image to be combined and the image currently being
combined (
A/PROG selector button:
B/PRESET selector button:
DSK selector button:

Adjusting the Audio Level

When adjusting the audio level of input sources 5 to 8,
operate the corresponding fader while holding down the
the MIC fader to adjust the MIC input level.
the [SETUP] menu (
The audio level of the program output is adjusted with the
meter on the setting screen (
audio (
The output level of the sound to be monitored with
To link sound with video effects
during execution of transition (
(
turn on. When the transition lever is operated, the audio
faders are moved accordingly.
33