Periodic Maintenance; Main Unit Periodic Maintenance (Table 20) - Canon imagerunner advance C9065S PRO Service Manual

Canon
O. Periodic Maintenance
Some parts of the machine must be periodically maintained and/or replaced
on a periodic basis to ensure a specific level of machine performance. These
parts are likely to affect the performance once they fail even in the absence of
external change or damage. Whenever possible, plan their replacement so
that it will coincide with a scheduled service visit.

Main Unit Periodic Maintenance (Table 20)

Part Name
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts) Δ: Cleaning ×: Lubrication □: Adjustment ■: Inspection
Dustproof Glass Cleaning (Bk)
Dustproof Glass Cleaning (Y/M/C)
Primary Charging Assembly
Pre-primary Transfer Charging Assembly
Toner Catch Sheet (color)
Toner Catch Tray (black)
Toner Blocking Plastic Sheet
Primary Charging Wire
Primary Charging Wire Cleaning Pad Slider
Primary Charging Wire Cleaning Pad Holder
Pre-transfer Charging Wire
Pre-transfer Charging Wire Cleaning Pad Slider
Pre-transfer Charging Wire Cleaning Pad Holder
Grid Plate
Grid Cleaning Pad
Developing Assembly (Y)
Developing Assembly (M)
Developing Assembly (C)
Developing Assembly (Bk)
Drum Cleaning Blade (Bk)
Drum Cleaning Scoop-up Sheet (Bk)
Edge Scraper 1 (Bk)
Edge Scraper 2 (Bk)
Post-secondary Transfer Sensor
Patch Sensor
ITB Unit
ITB Driver Roller
ITB Stirring Roller
ITB Inside Scraper
ITB HP Sensor
25 Estimated average values in the field, based on data from supplier. Data is subject to change depending upon many factors
including, without limitation, monthly copy volume, environment, type of image printed and customer handling of the equipment.
imageRUNNER ADVANCE C9000S PRO Series Service Guide
Revision 2
imageRUNNER ADVANCE C9000S PRO Series Service Guide
Estimated Timing (sheets)
Δ ♦
Δ ♦
Δ
♦
♦
♦
♦
♦
♦
♦
♦
●
●
●
●
●
●
●
●
Δ
Δ
25
Remarks
Δ
Clean as needed
Clean as needed using the
Δ
attached cleaning tool
Clean when replacing the Primary
Charging Wire
Clean when replacing the Pre-
primary Transfer Charging Wire
Δ
Clean when replacing the Color
Δ
Drum Unit
Clean with lint free paper
Δ
Clean as needed
Clean when replacing the Black
Drum
When releasing the pressure of
□
ITB Unit, execute Auto Correct
Color Mismatch
Δ
Δ
Clean when replacing the ITB
Δ
Δ
March 2015
Page 42