Log In With A Web Browser - Emerson Micro Motion 5700 Configuration And Use Manual

Note
If your PC has more than one wired network adapter, be sure to select the adapter that is connected
to the transmitter.
C.3

Log in with a web browser

Prerequisites
To log in to the transmitter with a web browser:
•
•
Procedure
1.
2.
Upon successful login, the transmitter home page appears.
Configuration and Use Manual
The PC and transmitter must have been properly configured for their connection
type.
You must know the IP address of the transmitter.
Enter the IP address of the transmitter in the web browser address bar.
When the transmitter is found, the login page appears.
Enter the login credentials.
Two users are predefined. You can change the passwords, but you cannot add or
delete users.
Table C-2: Login credentials
Username Default password
Admin admin
Operator operator
Note
Transmitters using the default Admin password are not secure. It is strongly recommended
that you immediately change the password and keep it confidential.
Using a Web browser to configure the transmitter
Description
Complete access:
• Can perform operator functions, such as
meter verification, zero verification,
starting/stopping batches, starting/stop-
ping totals, and resetting totals
• Can view and make changes to transmit-
ter configuration
Limited access:
• Can perform operator functions, such as
meter verification, zero verification,
starting/stopping batches, starting/stop-
ping totals, and resetting totals
• Can view transmitter configuration, but
cannot make changes
261