ZKTeco X7 System User Manual page 12

2. The indicator turns red and makes a long beep in fourth step indicates system
exits when setting successfully.
2.3 Configure Authentication Mode
1. The administrator
password is authenticated.
Note: 1.The indicator turns red and makes a long beep in fourth step indicates
system exits when setting successfully.
2. Details about the authentication mode are as follows:
Authentication Mode
Mode 1 (number1)
Mode 2 (number2)
Mode 3 (number3)
Mode 4 (number4)
Mode 5 (number5)
Mode 6 (number6)
2.4 Configure Concealed Mode
If the Concealed mode is enabled, the indicator is off when the Concealed mode
is in the sleep mode.
Поставщик систем безопасности: TELECAMERA.RU
2. Press5.
(The indicator turns green
and makes a long beep.)
5.Exit.
(The device automatically
exits the process when the
operation is completed.)
type
PW
RF
FP
FP/PW/RF
RF&PW
FP&PW
Description
Only password verification
Only RF Card verification
Only fingerprint verification
fingerprint or password or RF verification
RF and password verification
fingerprint and password verification
11
3. Enter the authentication
mode.
4.The configuration is
successful.
(The indicator turns green
and makes a long beep,
then turns red and makes a
long beep again.)