Initial Power-Up
Once the batteries are installed in
the unit, the Call Button blinks and
LCD display shows
Interface ENA.
If the USB Serial Interface is not
to be used, press the ESC button
to exit this mode. The default
status screen will be shown on the
display. If nothing is pressed, the
unit will enter sleep mode after 60
seconds and the screen will clear.
Status Screen
The Status Screen toggles the
current Frequency and CTCSS
setting continuously.
LCD DISPLAY
CB200-M
Insert Battery
INTERFACE ENA
-ESC to EXIT-
Press Esc
Freq No: 6
MHZ:154.5700
CTCSS CODE: 1
67.0 HZ ANA
Channel Spacing
12.5 KHZ
11