Table of Contents
Advertisement
Option
Prevent
Standby/Hibernate
Allow
Standby/Hibernate
Note:
Even though Prevent Standby/Hibernate is selected, you can transfer the PC
into Standby/Hibernate status manually under the Windows Vista operating
system.
Select Settings > Options, and then you can set the default values on each tab.
To recover the current default c
Diagnostics
The EC321 allows you to query information about the EC321 and the UIM card.
Select Tools > Diagnostics.
Messages in Wireless Device: This information is displayed in the format of "XX/YY".
"XX" indicates the amount of the existing messages, and "YY" indicates the capacity of
the EC321.
Conta
cts in Wireless Device: This information is displayed in the format of "XX/YY".
"XX" indicates the amount of the existing contacts, and "YY"
the EC321.
Messages in UIM: This information is displayed in the format of "XX/YY". "XX"
i
ndicates the amount of the existing messa
UIM card.
C
ontacts in UIM: This information is disp
indicates the amount of the existing contacts, and "YY" indicates the capacity of
UIM card.
ESN Number: The ESN number
API Version: The version of the API.
Firmware Version: The board software version of the EC321.
Hardware V
ersion: The hardware version of the EC321.
To prevent the computer from standby or hibernate mode.
To allow the computer to start the standby or hibernate
mode.
onfiguration, click Default.
ges, and "YY" indicates the capacity of the
layed in the format of "XX/YY". "XX"
of the hardware (EC321 or UIM card).
50
Description
indicates the capacity of
the
Advertisement
Table of Contents
