Table of Contents
Advertisement
Send
ing and Receiving a Message
Writing a New Message
Click
or select Tools > SMS, Then the SMS interface is displayed.
Step
1
Click Write and the Write interface is displayed.
2
Enter the telephone number(s).
You can enter one or more number(s) by one of the following ways:
To enter one or more numbers directl
numbers separated by semicolons ";".
To select a number from the contacts: Click Contacts. S
contact(s) and click OK. Select the n
dialog box and click OK.
Note:
3
Input the message, the c
right of the Contacts text box. The m
characters.
Click Send to send
4
After the message is sent successfully, it is automatically saved to the
Outbox. If the message is sent unsuccessfully, you are prompted whether to
send it again. If you cancel the sending, the m
Click
Click Clear to clear the contacts and the message content.
You can directly enter the numbers or select the numbers in the
contacts.
When you select more than one contact, you can press Shift to
select a sequence of contacts, or press Ctrl to select the contacts
one by one.
If you select several rece
box to simplify t
haracter number is displayed in real time on the upper
the
message.
Save
to
save the message to the Draft.
Action
y: In the Contacts textbox, enter the
umber
ivers, click the Apply to all items check
he following operations.
aximum length of each message is 1000
27
10
elect one or more
to send a message in the pop-up
essage is saved to the Outbox.
SMS
Advertisement
Table of Contents
