Features • 16:9 LCD screen • LED-Backlight-Technology • DVB-C/T-HDTV-Tuner • Cable-analogue-Tuner • Electronic Progr. Guide (EPG) for DVB • USB-Media player • Auto Power Off • PVR (Personal Video Recorder) • Time Shift • New Thin-frame design* Information for the DVB-T function •...
Important safety information WARNINGS TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS, PLEASE CAREFULLY READ ALL SAFETY INSTRUCTIONS. THE SEPARATE OPERATING MANUAL MAY CONTAIN ADDITIONAL SAFETY INSTRUCTIONS. THIS APPLIANCE IS INTENDED FOR DOMESTIC / HOUSEHOLD USE ONLY AND SHOULD NOT BE USED FOR ANY OTHER PURPOSE OR IN ANY OTHER APLICATION, SUCH AS NON DOMESTIC USE OR IN A COMMERCIAL ENVIRONMENT.
Page 5
Important safety information Mains plug wiring In a rewirable plug the wires in the mains lead of this equipment must be connected as follows. The wire coloured brown must be connected to the terminal that is marked with the letter L. The wire coloured blue must be connected to the terminal that is marked with the letter N.
Page 6
Important safety information How to attach the stand NOTE: • Unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. • Do not support the TV by the screen as sharp objects and too much pressure may cause damage. •...
Location of controls Description of Indicators and Controls 1. Loudspeakers 2. Power indicator: The power indicator lights up red in standby mode, and green in power - ON mode. 3. Remote sensor 4. TV/AV/ENTER button: Select input mode. In Menu : Using as ENTER button. (Channel) / /▲/▼...
Remote Control Function Page Enter standby mode or turn on the power Display programme position number 14, 15 Select between the available broadcast audio 14, 15 Display the subtitle Select channel Select Teletext page Enter password Select an input source Display the EPG (Electronic Progr.
Page 9
Remote Control Install the batteries Use batteries type UM-4 (AAA-Size). Do not use old or weak batteries. The remote control may not work properly with a weak voltage from such batteries. Replace exhausted batteries with new ones. Never try to recharge normal batteries - this could cause an explosion.
Antenna connection Note: Before you connect other appliances: • To avoid potentially damaging your set, make sure all items are switched off and disconnected from the mains power when you make the connections. • Arrange the desired connection. • When you have finished making the connections, reconnect the mains power to the unit and switch it back on.
Press ▲ or ▼ to select “Antenna” or “Cable”. Auto setup Then press ▶ or ENTER. At the first time you operate after the purchase, “Initial Setup” menu will appear. Initial Setup Tuner Mode You can repeat this process via the menu system (see page 19).
Note: On-screen Language Selection • Quick: If TV find a channel of NIT1 (Network Information Table), it will find all other Press MENU. Then press ◀ or ▶ to select channels in NIT1. Don’t scan for the channels “Setup”, then press ENTER. of other NIT.
Channel Setup Auto Synchronization This feature can display the time based on the The Automatic station presetting stores the DVB signal information. stations in a specific order. However, this order can be changed if you wish. If you wish to set the time manually, select “Off” as follows and then perform the “Date”...
Still picture Basic Operation Press FREEZE to make a still picture. To cancel the still picture, press FREEZE again. Channel selection With the Numbered buttons (0-9). Note: Example: • During still picture mode, Aspect Ratio feature is not • No. 2: Press 2. available.
Select Page Press P + or - until the page you desire appears. Or ... enter the requested page number by using the 10 Number Buttons. And if you mistype something, just enter the complete 3-digit wrong page number then enter the desired number again.
Remarks on DVB-T system DVB-T is at present still being developed. You can get information regarding the current stage of development from your specialist retailer. As a digital service DVB-T basically works differently to previous analogue TV reception. Reception Possibilities: In contrast to cable TV, DVB-T is received via room or roof antennas.
Password Setup (Parental lock) 1 Service list : Lists all the services that are currently available. Parental Guidance is a function of the channel As you scroll through the service list by provider. If it is not supported by the channel, pressing P+/- .
Other convenience functions Selected Items Setup hint Picture Picture Mode Standard / Vivid / Soft / User Select the most suitable picture mode according to your lighting condition. Brightness / Contrast / Colour / Sharpness / You can adjust the picture to your preference. Tint •...
Page 19
Other convenience functions Selected Items Setup hint Setup OSD Language See page 12. Aspect Ratio See page 21. Blue Screen You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or On / Off absent.
Picture size and resolution Resolution and picture quality Broadcast wide screen films in different resolutions. The following table shows the resolution options for wide screen film broadcast media. Broadcast media Resolution of the wide Analogue Digital DVB-T Satellite HDTV Blu-ray- screen signal cable TV cable TV...
Picture format Picture Size Other formats The required picture format can be set by pressing Press PICTURE SIZE until the desired size is the PICTURE SIZE button. Press PICTURE SIZE reached. until the required format is displayed. 16:9 You move through the following formats when you The width of the picture will be zoomed evenly.
Watch the recorded programme Information for recording function Press REC LIST. Recorded file list will appear. Preparation: Plug-in an external storage device into the USB port. Press ▲/▼/◀/▶ to select desired file, then start playback with ENTER. Note: • You can use special function for playback. See •...
Time Shift Channel number: Press ◀ or ▶ to select channel number, and it will show the channel information below. You can record a digital programme by using the USB storage device. This function is for Start date: Set the start date of record / reminder. your convenience, and allows you to pause/ Start time: Set the start time of record / reminder.
Media Operation Press ◀/▶ to select the desired media type Photo/Music/Video or Text at Media Selection Connect the USB storage device into the Media and press ENTER. File selection window will Input terminal. appear. Press MEDIA to display the Media menu. Select folder or file with ▲/▼/◀/▶, and then start the playback with ENTER.
Playback files Press MENU in Playback screen. You can use various playback operation with appropriate Press ◀/▶ to select Photo, Music, Video or Operation menu. Select the option by ENTER/▲/▼/ Text at Media Selection and press ENTER. File ◀/▶. selection window will appear. Pause/Play ( Select folder or file with ▲/▼/◀/▶, and then Pause/Play the contents.
Connecting an HDMI or a DVI device to the HDMI input The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or uncompressed digital video from a DVI equipped device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to connect the external speaker units to output the audio signals.
Page 27
Connection to other equipment 3. Connecting to other equipment Please make the following settings inside your receiver’s / DVD-player’s setup-menu: Video signal: composite (CVBS) TV-Format: 16:9 Volume: MAX If you miss to make these settings properly, picture quality will be inferior and parts of the picture might be missing.
Troubleshooting table Please check the following list before requesting service. Symptom Possible solution Page No picture, no sound Switch on the set. Check that the mains power outlet is properly connected. Select appropriate input mode. Unplug unit for 1 minute, then plug it back in. No reception Have you tuned in the TV stations? Press 1 on the remote control.
Specifications System: Analogue: PAL (B/G, D/K, I), SECAM (B/G, D/K) • This product is not compatible with analogue SECAM L broadcasting. Digital: DVB-T, DVB-T HD (H.264), DVB-C, DVB-C HD (H.264) Video Colour System: PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60Hz Preset channels: 4000 Service in total of Analog and Digital Frequency Range: Analogue: 45.75~858MHz Digital: E2~E69...