Siemens SINUMERIK 840D sl Operating Manual page 103

Adaptation of values in projects from Version 2.6
Replace the UP() function with a value query.
Syntax Version 2.6
Up($Step[id])
UP(data)
UP(doX) != null &
UP(doX.slaveNr) == 3
Adaptation of functions in projects from Version 2.6
Adapt the Version() function. Enter the range to determine the version.
Syntax Version 2.6
Version(NCK) <= 4.4.18
Version(HMI Advanced) >= 6
Version(ShopMill) != null
Exists(<area>, <path>)
Replace the NC() function with a value query.
Syntax Version 2.6
NC($MC_CHAN_NAME, 5) ==
"CHAN5"
Replace the BD() function with a value query.
Syntax Version 2.6
BD($MM_TECHNOLOGY, ADV) == 2
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Conversion possible?
Yes
Yes
Yes
Conversion possible?
Only in part:
Example:
Version(NCK) → Version(?NCU|PCU,
"NCK")
Only in part:
Example:
Version(HMI Advanced) → Version(?
NCU|PCU, "HMI Advanced")
Only in part:
Example:
Version(ShopMill) → Version(?NCU|
PCU, "ShopMill")
Only in part:
Set in "", but only the ARC, NCU, PCU
areas are still possible.
Conversion possible?
Yes
Special case:
NC($MC_CHAN_NAME) → NC[C1].
$MC_CHAN_NAME
Conversion possible?
Only in part:
Set in "", but only the ADV, SL sections
are still possible.
(EMB omitted)
Create MyConfig - Expert
4.2 Introduction
Syntax as of Version 4.6:
Up.$Step[id]
UP.data
UP.doX != null &&
UP.doX.slaveNr == 3
Syntax as of Version 4.6:
Version(NCU, "NCK") <= 4.4.18
Version(PCU, "HMI Advanced")
>= 6
Version(PCU, "ShopMill") !=
null
Exists(<area>, "<path>")
Syntax as of Version 4.6:
NC[C5].$MC_CHAN_NAME ==
"CHAN5"
Syntax as of Version 4.6:
BD[ADV].$MM_TECHNOLOGY == 2
103