GE GE314 Operating Manual page 40

9.3.5 ANTI-PASS BACK MODE
. The Anti-pass Back mode is only used when you installed Exit Reader. Do not se
☞
you installed Exit Button. You must install GE314 for entry and Exit Reader for Exit.
UNUSE: Anti-pass Back mode OFF
USE: Anti-pass Back mode ON
☞. ALL FLAG RESET: Allow the acc
9.3. 6 DURESS MODE
☞. You can set Duress Mode for Reader#1. Default setting is UNUSE. If you select USE, LCD will display
default Duress Password '00'. Enter 2 digit Duress Password.
Note!!
If you are in Duress condition, enter 2 digit Duress Password and press <ENT> key prior to present the card.
Door will be opened as normal but the Duress Alarm will be generated and reported to the h
9.3.7 WIEGAND OUTPUT
ess only one time whatever the Anti-pass Back flag is.
40
t this mode in USE when
ost PC.