Figure: RS-485 Communication between multiple GE314 and a host PC
6.7 TCP/IP CONNECTION (OPTIONAL)
Optional TCP/IP Module is required for TCP/IP communication to the host PC.
1. Connect RJ45 plug, LAN cable of the network system to RJ45 jack of the GE314.
2. If you install multiple GE314 and only one TCP/IP port is available, you may connect one GE314 to
TCP/IP then connect all GE314 units to RS485 multiple communication shown above.
3. Set a different COMM ID for each GE314.
4. Install and run the GE314 Application Software.
Figure: TCP/IP Communication between multiple GE314 and a host PC
21