kbd->bi_immr_base = 0xff700000.
Starting kernel at 0x10000 ...
Now beginning to initialize system
User interface con0 is available.
After the router completes booting the applications, the following information appears on the terminal
screen:
Press ENTER to get started.
Press Enter to begin configuring the router at the prompt:
3.
<HP>
NOTE:
The router displays a CLI. For more information about the CLI, see
•
Configuration Guide
The output depends on your router model.
•
Verifying router operation (recommended)
HP recommends that you verify the following after the router is powered on:
The cooling system is working. You should be able to hear fan rotation noise and feel air being
•
blown out.
All LEDs are functioning correctly.
•
Table 9 ED status when the router is operating correctly
Part
MPU
Power
supply
Fan tray
For the card LED description, see "LEDs."
Connecting the router to the network
You can connect the router to the network using the following cable types:
AUX cable
•
Ethernet twisted pair
•
Optical fiber
•
.
LED
MPU status LED
LPU status LED
Power supply input/output LED
Fan tray status LED
Name
SFC
ACT
RUN
RUN
IN
OUT
RUN
ALM
28
HP A8800 Routers Fundamentals
Status
Steady green
Active MPU: Steady green
Standby MPU: Off
Flashing green
Flashing green
Steady green
Steady green
Steady green
Off