Buildings - Mitsubishi Electric MAC-568 User Manual

10. BUILDINGS

Adding or Editing a Group/Building
(Only available when controlling multiple units)
When controlling multiple units, groups/buildings can be set
up and maintained collectively. To access these functions
use the menu navigation. To edit a group/building - click on
the group/building name.
Add Group/Building
1. Select "Add building" from the menu navigation when
viewing all units.
2. Enter a name for your group/building; this could be
simply the name of the building or the building with floor
location.
3. Select "Add" to save.
Edit Group/Building
1. Click on the group/ building name when viewing all units.
2. You can then change the name of your group/building
and the time zone (if applicable).
3. Select "Update" to save.
Here you can also send a Group Control command as
outlined in Section 6.
Time Zone (of building)
(Only available if your country has multiple time zones)
Please select the country (time zone) where the building is
located from the drop down list of supported countries. This
is very important as it will be used to provide the correct time
zone for rules and scheduling information of units located in
this building.
19 19