Table of Contents
Advertisement
Installation
Step-5: Fixing FG to the Cable
Skin the cable (10 mm) and FG cable is soldered to the shield mesh.
Wrap the self-bonding insulating tape in the part of shield mesh..
Step-6: Fixing FG to the Connector
One end of soldered shield mesh is wrapped to the connector CN1.
Wrap the self-bonding insulating tape on the part of shield mesh of CN1..
2-30
Fujitsu and Fujitsu Customer Use Only
BroadOne GX4000 Manual (R3.0) issue 1.03
Advertisement
Table of Contents
