Video Adjustment For Specific Area - Pioneer DVR-LX61D Service Manual

1

8.6 VIDEO ADJUSTMENT FOR SPECIFIC AREA

[Purposes]
A
Depending on the area, if a flicker
may appear in a picture received by
the tuner, it can be corrected or
reduced with this setting.
[1] Specific-Channel Setting Mode
B In this mode, specific settings can be made for up to 12 channels.
For channels that do not have specific settings, the settings of General Setting mode are applied.
[How to enter this mode]
Select a channel or line input (L1-L3) on which a specific setting is to be made.
Press the ESC then CHP/TIM keys on the remote control unit for servicing. "General Setting mode"
is displayed.
Press the DIG/ANA key in General Setting mode. Specific-Channel Setting mode is entered.
[How to exit]
Press the ESC key on the remote control unit for servicing to return the Normal mode.
C
[Note]
Setting is in effect only during recording/playback stop.
[Setting examples]
The setting examples in Specific-Channel Setting mode are shown below.
For details on each setting item, see "Table 1: Key operations in Specific-Area Setting mode."
[When specific channel setting have NOT been made]
VDEC Specific Area Mode Ver2.00
Input - [ TUNER ]
Sync AGC
D
H Threshold Level : 12
General setting
data
V Threshold Level
EPG EQ
Individual setting state
Input Channel - [
Specific channel
setting data
Sync AGC
H Threshold Level : ---
V Threshold Level
E
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (- -).
[Tips]
• If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are
identical to the default settings or those of General Setting mode.
• The setting indicated with an asterisk (*) is the default.
• The channels to be indicated for "Input Channel" are as shown below:
Line inputs: L1-L3, DV (DV is not valid for specific-area settings.)
Tuner channels: Channels received by the tuner (channels to be set in Specific-Channel Setting mode, etc.)
F
102
1
2
[Tools to be used]
Remote control unit supplied
: ON *
*
: 10
: OFF *
1CH ]
: ---
: ---
DVR-LX61D
2
3
Remote control unit for servicing
with the unit
[When specific channel setting have been made]
VDEC Specific Area Mode Ver2.00
Input - [ TUNER ]
Sync AGC : ON
H Threshold Level : 12
V Threshold Level : 10
EPG EQ : OFF
Individual setting state
Input Channel - [ 1CH ]
Sync AGC : ON
H Threshold Level : 14
V Threshold Level : 7
3
4
(GGF1381)
*
*
*
*
*
4