Yamaha CS-700 Operation Manual page 73

Property Type
voip.codec5 INDEXED_
OPTION
voip.quality NUMBER
voip.ptime NUMBER
voip.mwi BOOLEAN
voip.vm-number TEXT
voip.do-not- BOOLEAN
disturb
voip.auto-answer NUMBER
voip.duration NUMBER
voip.recent-call- BOOLEAN
enabled
voip.dial-plan TEXT
Values
0 : None
1 : G.722
2 : G.711 u-law (PCMU)
3 : G.711 A-law (PCMA)
4 : G.726
5 : G.729
0-10 : VoIP audio quality index
10-60 : ptime interval in ms
0 : Disable MWI signalling
1 : Enable MWI signalling
VoIP voicemail number.
0 : Disable DND
1 : Enable DND
0 : Disable auto-answer
100-699 : RESPONSE to send
when answering
0 : No maximum
1-10080 : Maximum VoIP call
duration in minutes
0 : Disable recent call list
1 : Enable recent call list
dialplan : Dial plan string.
Default Value Description
5 Lowest prioritized codec. At least one codec different from "None"
has to be selected in voip.codec1-voip.codec5.
6 Configure VoIP audio quality. Audio quality (0-10, default=6). TBD if
this is used.
20 The ptime (packetization interval) value for a codec determines the
length of time in milliseconds represented by the media in an RTP
packet which is used to transmit audio traffic. The valid range is 10-
60. The default is 20.
0 Enable displaying the message waiting indicator (MWI) on the
device and enable receiving message waiting notifications from the
PBX. The PBX must be configured to support voice mail for the
registered user in order for this feature to work properly.
The number that is dialed when voicemail is called from the UI.
0 Configure do-not-disturb (DND) setting. 0 - disable, 1 - enable.
0 Auto answer incoming VoIP calls. We recommend enabling this
feature only for test purposes. If the phone is set to Do Not
Disturb or if there are no available lines, the Forward rules will
apply. If there are no Forward rules specified, the incoming call will
be sent to voice mail. If voice mail is not supported, the call will be
rejected.
0 Specifies the maximum VoIP call duration in minutes. When the
call duration reaches the maximum duration, the call will be
automatically terminated. The maximum limit is 10,080 minutes,
or 7 days. A 0 indicates no maximum call duration.
1 Enables or disable the Recent Calls list.
Specifies the VoIP dial plan string. See the User's Guide for a
detailed description of dial plan settings.
73