Autoreclose; Channel Tests - GE L90 Instruction Manual

CHAPTER 6: ACTUAL VALUES
— State number. The most recently received value in GOOSE message field stNum. The publisher increments stNum
stNum
each time that the state of one or more of the GOOSE message members is sent with a revised value.
— Sequence number. The most recently received value in GOOSE message field sqNum. The publisher sets sqNum
sqNum
to zero each time the state of one or more of the GOOSE message members is sent with a new value, and it increments it
whenever a GOOSE message is resent without any member value change.

6.3.10 Autoreclose

ACTUAL VALUES  STATUS  AUTORECLOSE
 AUTORECLOSE

The automatic reclosure shot count is shown here, where the shot count is the number of reclosures that can be
attempted before reclosure goes to lockout.
If the status reads "not available," try enabling and configuring the function under
AUTORECLOSE  AUTORECLOSE

6.3.11 Channel tests

ACTUAL VALUES  STATUS  CHANNEL TESTS
 CHANNEL TESTS

The status information for two channels displays in this menu.
L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
AUTORECLOSE

SHOT COUNT: 0
. If that does not work, the feature is not supported on your device.
CHANNEL 1

STATUS: n/a
CHANNEL 1 LOST

PACKETS: 0
CHANNEL 1 LOCAL

LOOPBCK STATUS: n/a
CHANNEL 1 REMOTE

LOOPBCK STATUS: n/a
CHANNEL 1

LOOP DELAY: 0.0 ms
CHNL 1 ASYMMETRY:

+0.0 ms
CHANNEL 2

STATUS: n/a
CHANNEL 2 LOST

PACKETS: 0
CHANNEL 2 LOCAL

LOOPBCK STATUS: n/a
CHANNEL 2 REMOTE

LOOPBCK STATUS: n/a
CHANNEL 2

LOOP DELAY: 0.0 ms
CHNL 2 ASYMMETRY:

+0.0 ms
VALIDITY OF CHANNEL

CONFIGURATION: n/a
PFLL

STATUS: n/a
Range: 0, 1, 2, 3, 4
SETTINGS  CONTROL ELEMENTS 
Range: n/a, FAIL, OK
Range: 0 to 65535 in steps of 1. Reset count to 0
through the COMMANDS  CLEAR RECORDS menu.
Range: n/a, FAIL, OK
Range: n/a, FAIL, OK
Range: –10 to 10 ms in steps of 0.1
Range: n/a, FAIL, OK
Range: 0 to 65535 in steps of 1. Reset count to 0
through the COMMANDS  CLEAR RECORDS menu.
Range: n/a, FAIL, OK
Range: n/a, FAIL, OK
Range: –10 to 10 ms in steps of 0.1
Range: n/a, FAIL, OK
Range: n/a, FAIL, OK
STATUS
6
6-7