Related Manuals for Trakm8 T10-Micro
Summary of Contents for Trakm8 T10-Micro
-
Page 1: Installation Notes
T10 Installation Notes v1.7 T10 Family Installation Notes T10 & Derivatives For Cars, Car Derived Vans, And Light Commercial Vehicles Generic T10 Installation Notes v1.7.doc 12.08.2015 Page 1... -
Page 2: Table Of Contents
5.5.6 Output Installation (T10-Lite 9wire ONLY) ............18 5.5.7 Immobiliser Feature (T10-Lite 9wire ONLY) ............18 5.5.8 CAN Installation – Vehicle (T10-Micro v4, T10-Lite 5wire & 9wire) ....... 19 5.5.9 Cable Assemblies ....................21 5.5.10 Engineering Mode ..................... 22 Appendix A –T10 Records Appendix B –... -
Page 3: Contact Information
T10 Installation Notes v1.7 1 Contact Information All initial communication or enquiries should be made to: Trakm8 Limited Lydden House Wincombe Business Park Shaftesbury Dorset SP7 9QJ International Tel: +44 (0) 1747 858444 International Fax: +44 (0) 1747 858222 E-mail support@trakm8.com... -
Page 4: Document Revision History
Date of Issue Reason/Description of Change Issue April 2014 Draft Issue. January 2015 First Release includes T10-Micro, T10 MiniLite and T10 Lite. March 2015 Second Release March 2015 Includes additional accessories and abbreviations March 2015 Additional Safety, temperature and Battery information March 2015 Product name references T10-Lite updates. -
Page 5: Preface
2. Any attempt to make modifications not expressly approved by Trakm8 may invalidate the warranty and the user’s authority to use the equipment. -
Page 6: Product Certification
Directive 1999/5/EC (R&TTE Directive). As part of the requirements of the R&TTE directive the T10-Micro and T10-Lite have been designed to operate on the European GSM 900 MHz and DCS 1800 MHz GSM/GPRS frequency bands. - Page 7 T10 Installation Notes v1.7 USA and Canada Approval FCC – Marking (T10-Micro) The T10-Micro complies with Part 15 of the FCC Rules and contains the following markings. FCCID:SMGT10MICROBLE Operation of the product is subject to the following two conditions: 1.
-
Page 8: The T10 Family
T10-Lite (2/3/5/9 wire) 4.1 T10-Micro The T10-micro is a plug and play product designed to be inserted into the vehicle ECU Diagnostic socket (J1962) which usually is accessible within the driver cockpit area and can be accessed without the need of specialised tools. This product does not require the involvement of a specialised fitter and can usually be fitted by the end user. - Page 9 T10 Installation Notes v1.7 Important Notes! When using the T10 platform you should remember the following: 2. In order for GPS to function correctly, the T10 must have a clear view of the sky in order to receive data from the satellites. Should this view be obscured, e.g. the vehicle is parked in a metal-clad building then the performance of the T10 platform may be impeded.
-
Page 10: Sim Card
T10 Installation Notes v1.7 5.2 SIM Card The SIM card fitting process is identical for the entire family range of products. 5.2.1 Before fitting the SIM card 1. If you have not already registered your SIM card with the mobile network, you should do this before proceeding. -
Page 11: Backup Battery
T10 Installation Notes v1.7 5.3 Backup Battery The T10-Lite products can be supplied with a Li-ion Polymer 3.7v 1500mAh backup battery for operational scenarios where the main power can be removed or the main power is required to be monitored and alerted against in the event of a disconnection. This Battery can ONLY be fitted/replaced as part of the production process of the unit and is NOT a user fit/replacement feature. -
Page 12: Cables And Accessory Options
The T10 family has various cable assemblies and accessories depending on how the product is to be Installed and used: T10-Micro The T10-Micro has No Accessories as this is a plug and play device connecting into the J1962 connector of the vehicle. T10-Lite 2wire, 3wire, 5wire The T10-Lite 2 through 5 wire has the following cable options: 1. - Page 13 T10 Installation Notes v1.7 The following sections will detail the block diagrams and associated cabling for each of the T10 systems. T10-Micro System This system requires no wiring and simply plugs straight into the vehicle diagnostic socket. T10-Lite 2wire System...
- Page 14 T10 Installation Notes v1.7 T10-Lite 9wire System There are 4 main cable options used with the T10-Lite (CAB400, CAB405, CAB410 and CAB415). These all have the same wire colour coding and location for the Power, ground and Ignition and are connected as follows: Wire Description Notes...
-
Page 15: Driver Interface Button Installation (T10-Lite 9Wire Only)
The construction of the CAB415 has been done in such a way as to make these functions a plug and play option with either of the Trakm8 driver interface button options. The CAB601 is used where a button and LED are required for business/private functionality. -
Page 16: Dallas I-Button Installation (T10-Lite 9Wire Only)
LED indication to give visual feedback of detection to the user. Trakm8 provide a plug and play reader for the simple touch detection of a driver so that it can be plugged in directly to the main loom (CAB415). This reader can be used with the driver Tag (TAG700). -
Page 17: Inputs Installation (T10-Lite 9Wire Only)
T10 Installation Notes v1.7 5.5.5 Inputs Installation (T10-Lite 9wire ONLY) The T10-Lite 9wire product has a single Input (Pin 9) and it is of a digital type. It is not configurable and it is NOT capable of processing analogue signals. It is ONLY available in the 70-30 hardware code range and the CAN twisted pair of wires take on NEW functionality (See Can section). -
Page 18: Output Installation (T10-Lite 9Wire Only)
T10 Installation Notes v1.7 5.5.6 Output Installation (T10-Lite 9wire ONLY) The T10-Lite 9wire product has a single dedicated output. This output (0) can be controlled automatically via driver authorisation protocol and therefore can be used as security immobilisation devices. (See example in the Immobiliser section). If the immobilisation function is NOT required then both of the outputs can either be controlled directly via command or automatically by EVENT triggers within the I/O control module. -
Page 19: Can Installation - Vehicle (T10-Micro V4, T10-Lite 5Wire & 9Wire)
T10 Installation Notes v1.7 5.5.8 CAN Installation – Vehicle (T10-Micro v4, T10-Lite 5wire & 9wire) The CAN (vehicle) protocols supported are as follows: 1. EOBDII (via J1962) (Cars and Light Commercial Vehicles)(CAN Micro’s & 9 wire 70-35A). 2. K-Line (CAN Micro’s & 9 wire – 70-30A hardware). - Page 20 T10 Installation Notes v1.7 NOTE IF the J1962 connector does NOT have an open center slot in the middle of the connector then it is NOT 12v Compatible. When the center slot of the connector contains an obstruction this is indicative of the system being 24v operation and the obstruction is designed to prevent 12v systems from being connected to 24v.
-
Page 21: Cable Assemblies
The following section is a quick reference guide to all of the Main Cable looms used within the T10 Family. T10-Micro Cables There are no cables associated with the T10-Micro. T10 MiniLite Cables 2 way Molex Connector Pin Outs (CAB400) -
Page 22: Engineering Mode
The T10-Lite has an engineering mode to assist installation and test engineers out in the field. Engineering Mode is entered by issuing the SETENG command for the T10-Micro and T10-Lite products. The T10-Lite product can use the driver interface button (CAB601) to enter engineering mode. - Page 23 T10 Installation Notes v1.7 Engineering screen 4 (Internal Battery detection) You must have the internal Battery connected with external power and have had the ignition on at least once for this screen to function correctly Led On Internal Battery ...
-
Page 24: Appendix A -T10 Records
As we constantly strive to improve our products, all specifications are subject to change without notice. The information provided herein is believed to be correct at time of going to press. Copyright ® 2011 Trakm8 Limited Generic T10 Installation Notes v1.7.doc 12.08.2015... -
Page 25: Appendix B - Abbreviations And Glossary Of Terms
T10 Installation Notes v1.7 Appendix B – Abbreviations and Glossary Of Terms A list of abbreviated terms and their meanings are supplied here: Global System for Mobiles. Global Positioning Satellites. GPRS General Packet Radio Service. Controller Area Network. Power take off. Federal Communications Commission Industry Canada R&TTE -...
Need help?
Do you have a question about the T10-Micro and is the answer not in the manual?
Questions and answers