Siemens SIMATIC IPC277D Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Desktop
  5. INOX PRO SIMATIC IPC277D
  6. Operating instructions manual

Siemens SIMATIC IPC277D Operating Instructions Manual

Industrial pc
Hide thumbs Also See for SIMATIC IPC277D:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operating Manual
SIMATIC
Industrial PC
SIMATIC IPC277D
Operating Instructions
12/2016
A5E03409486-AE
___________________
Preface
___________________
Overview
___________________
Safety instructions
___________________
Installing and connecting the
device
___________________
Commissioning the device
___________________
Advanced device functions
___________________
Operating the device
___________________
Device expansion and
parameter assignment
___________________
Device maintenance and
repairs
___________________
Technical specifications
___________________
Technical Support
___________________
Markings and symbols
___________________
List of abbreviations
1
2
3
4
5
6
7
8
9
A
B
C

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC IPC277D

Summary of Contents for Siemens SIMATIC IPC277D

  • Page 1 ___________________ Preface ___________________ Overview ___________________ SIMATIC Safety instructions ___________________ Installing and connecting the device Industrial PC SIMATIC IPC277D ___________________ Commissioning the device ___________________ Advanced device functions Operating Instructions ___________________ Operating the device ___________________ Device expansion and parameter assignment ___________________ Device maintenance and...

  • Page 2: Legal Information

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    The PDF version of the documentation is supplied with the device on the "Documentation and Drivers" CD/DVD. Conventions The terms "PC" or "device" are used in place of the product name SIMATIC IPC277D in these operating instructions. In these operating instructions, the terms "Windows Embedded Standard 2009" and "Windows Embedded Standard 7"...

  • Page 4: Guideline To The Operating Instructions

    • automation systems and networks. Commissioning the Commissioning the product/system device Extended device func- Monitoring and display functions tions Expanding and assign- Procedure for installing device expansions (modules, drives) ing parameters to the device SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 5: Operating Instructions, 12/2016, A5E03409486-Ae

    Dimension drawings: Dimensions of the device and of modules • Detailed descriptions of boards and system resources • Technical support Service and support • Troubleshooting: Problems, causes, remedy • BIOS Setup • Abbreviations Abbreviations of the technical terms used SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 6 Preface SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 7: Table Of Contents

    SIMATIC IPC277D 7" ......................13 1.2.2 SIMATIC IPC277D 9" ......................15 1.2.3 SIMATIC IPC277D 12", 15" and 19" ..................17 1.2.4 IPC277D 7" and 9" – interfaces and operator controls ............20 1.2.5 IPC277D 12", 15" and 19" – interfaces and operator controls ..........20 Accessories ..........................
  • Page 8 Restoring the factory state ..................... 93 8.4.1.3 Installing Windows XP ......................94 8.4.1.4 Installation of Windows 7 ....................... 96 8.4.1.5 Setting up the language selection by means of the Multilanguage User Interface (MUI) ..100 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 9 System resources used by the BIOS/DOS ................131 9.5.4 Input/output address areas ....................133 9.5.4.1 Overview of the internal module registers ................133 9.5.4.2 Battery status register (read-only) ..................133 9.5.4.3 MRAM address register ......................133 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 10 Markings and symbols ........................... 163 Overview ..........................163 Safety ........................... 163 Operator controls ......................... 163 Certificates, approvals and markings ................... 164 Interfaces ..........................165 List of abbreviations ..........................167 Glossary ..............................171 Index ..............................179 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 11: Overview

    ● Rugged ● Maintenance-free operation possible SIMATIC IPC277D is available with various control units that differ with regard to the display size. This display is a color display with a backlit "wide-screen" format TFT color display. Displays are available in the following sizes for the SIMATIC IPC277D: ●...
  • Page 12 Watchdog Monitoring function for program execution • Restart can be parameterized in the event of a fault • Voltage drop Up to 15 ms buffer time at full load Buffer memory 512 KB MRAM SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 13: Configuration Of The Devices

    Overview 1.2 Configuration of the devices Configuration of the devices 1.2.1 SIMATIC IPC277D 7" Front and side view ① Display/touch screen ② Mounting clamp recess ③ Mounting seal Rear view ① Rating plate ② Interface designation SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 14 Overview 1.2 Configuration of the devices Bottom view ① Interfaces and operating elements ② Mounting clamp recess ③ Flap for memory card slot SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 15: Simatic Ipc277D 9

    Overview 1.2 Configuration of the devices 1.2.2 SIMATIC IPC277D 9" Front and side view ① Display/touch screen ② Mounting clamp recess ③ Mounting seal Rear view ① Rating plate ② Interface designation SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 16 Overview 1.2 Configuration of the devices Bottom view ① Interfaces and operating elements ② Mounting clamp recess ③ Flap for memory card slot SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 17: Simatic Ipc277D 12", 15" And 19

    SIMATIC IPC277D 12", 15" and 19" This section describes the 12", 15" and 19" devices using the example of the SIMATIC IPC277D 12". The 15" and 19" devices have an additional USB port at the front. Front and side view, 12"...
  • Page 18 Overview 1.2 Configuration of the devices Front view, 15" ① Front USB port ② Display/touch screen The front view of the 19" device is similar. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 19 Overview 1.2 Configuration of the devices Rear view ① Rating plate ② Interface designation Bottom view ① Mounting clamp recess ② Interfaces and operating elements ③ Flap for memory card slot SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 20: Ipc277D 7" And 9" - Interfaces And Operator Controls

    RJ45 Ethernet connection LAN1 for 10/100/1000 Mbps ⑥ RS-232 interface, D-sub connector, 9-pin ⑦ USB 2.0 connection, high speed Only two USB interfaces may be operated simultaneously in high-current mode. Observe the printing on the rear of the device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 21: Accessories

    Additional accessories can be found on the Internet at: ● Expansion components and accessories (http://www.automation.siemens.com/mcms/pc- based-automation/en/industrial-pc/expansion_components_accessories) ● Industry Mall (http://mall.automation.siemens.com) CompactFlash cards Note Replace CompactFlash cards only with replacement cards of the same product versions You may only operate this device with SIMATIC PC CompactFlash cards of product version 03 (ES03 or higher).
  • Page 22 Overview 1.3 Accessories SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 23: Safety Instructions

    • The installation of the device in an enclosure conforming to UL508 is a mandatory requirement for approval and operation in accordance with UL508. • Install the device in an enclosure that meets the requirements of paragraphs 4.6 and 4.7.3 of the standards EN 60950-1:2006 and IEC/UL/EN/DIN-EN 60950-1. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 24 Avoid high-frequency radiation: • Remove radiation sources from the environment of the device. • Switch off radiating devices. • Reduce the radio output of radiating devices. • Observe the information on electromagnetic compatibility (Page 112). SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 25 In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks.
  • Page 26 Therefore, ensure there are adequate safeguards for protecting the administrator accounts to prevent unauthorized changes. To do this, use secure passwords and a standard user account for normal operation. Other measures, such as the use of security policies, should be applied as needed. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 27: Notes On Usage

    • Always use suitable cleaning agents. Read the information on the Internet concerning chemical resistance, see the "After Sales Information System for SIMATIC PC/PG" (http://www.siemens.com/asis) link in the chapter "Technical Support" in section service and support (Page 161). SIMATIC IPC277D...
  • Page 28 A small number of defective pixels in the display is therefore unavoidable. This does not present a functional problem as long as the defective pixels are not bunched in one location. Additional information is available in the section "General technical specifications (Page 120)". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 29: Installing And Connecting The Device

    The device may be damaged. Do not dispose of the original packaging. Pack the device during transportation and storage. 5. Check the contents of the packaging and any accessories you may have ordered for completeness and damage. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 30 7. Please keep the enclosed documentation in a safe place. It belongs to the device. You need the documentation when you commission the device for the first time. 8. Write down the identification data of the device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 31: Identification Data Of The Device

    Note Replacement device without storage media When you order a replacement device, remove all the storage media, such as SSD, CompactFlash card, from your device. Insert the storage media in the replacement device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 32 Installing and connecting the device 3.1 Preparing for installation 2. Take down the Windows "Product Key" from the COA label. Example: Windows XP Pro: SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 33: Permitted Mounting Positions

    The device housing fulfills the requirement of a fire protection enclosure. Applicable for SIMATIC IPC277D 9": The device must be installed in a restricted access location (RAL), e.g. a locked switchgear cabinet, if the temperature is >45 °C. SIMATIC IPC277D...
  • Page 34 Maximum ambient temperature at the device Comment 7", 9" and 12" 15" 19" 45 °C 40° C 40° C The device must be installed in a fire protec- tion enclosure (see "General safety instruc- tions (Page 23)"). SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 35: Preparing The Mounting Cutout

    ● Permitted deviation from plane at the mounting cutout: ≤ 0.5 mm This condition must be fulfilled for the mounted HMI device. ● Permissible surface roughness in the area of the mounting seal: ≤ 120 µm (R 120) Dimensions of the mounting cutout SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 36 The following table shows the dimensions of the required mounting cutout: Mounting cutout Device 7 inch 9 inch 12 inch 15-inch 19-inch Width w Height h Width and height should be reversed accordingly when mounting in vertical format. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 37: Installing The Device

    ● Ensure there is enough free space in the control cabinet to allow the cover to be removed. ● Equip the control cabinet with struts for stabilizing the mounting cut-out. Install struts where necessary. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 38 • The device was secured with the supplied mounting clamps or with clamps which can be optionally ordered. • The mounting seal is undamaged. See also Technical specifications (Page 120) Dimension drawings (Page 115) Preparing the mounting cutout (Page 35) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 39: Securing With Clamps

    The following table shows the type, number and position of mounting clamps needed for the various HMI devices. HMI device Mounting clamps Type Quantity Position on the HMI device IPC277D, 7" display IPC277D, 9" display IPC277D, 12" display IPC277D, 15" display IPC277D, 19" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 40 Repeat steps 2 and 3 for all mounting clamps. Check the fit of the mounting seal. Result The HMI device is mounted and the relevant degree of protection is ensured at the front. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 41: Securing With Clamps (Can Be Ordered As Options)

    2. Working from the front, insert the device into the mounting cutout. 3. Fasten the control unit from the rear using the clamps. 4. Tighten the setscrews to a torque of 0.4 - 0.5 Nm. See also Accessories (Page 21) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 42: Connecting The Device

    • Only connect I/O devices which are approved for industrial applications in accordance with EN 61000-6-2 and IEC 61000-6-2. • I/O devices that are not hotplug-capable may only be connected after the device has been disconnected from the power supply. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 43 Regenerative feedback of voltage to ground by a connected or installed component can damage the device. Connected or built-in I/Os, for example, a USB drive, are not permitted to supply any voltage to the device. Regenerative feedback is generally not permitted. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 44: Connecting The Protective Earth

    M4 thread (see part labeled). Connect the protective conductor to the pro- tective conductor connection of the cabinet or the plant in which the device is installed. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 45: Connecting The Power Supply To The 7" And 9" Devices

    ● You are using the connection terminal supplied. ● A two-core cable with a cable cross-section of 0.75 mm to 2.5 mm for the 24 VDC connection. ● A slotted screwdriver with approx. 3 mm blade. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 46 Installing and connecting the device 3.3 Connecting the device Procedure Switch off the 24 VDC power supply. Connect the wires of the power supply. Connect the connection terminal at the marked position. See also Technical specifications (Page 120) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 47: Connecting The Power Supply To The 12", 15 And 19" Devices

    ● You are using the connection terminal supplied. ● A two-core cable with a cable cross-section of 0.75 mm to 2.5 mm for the 24 VDC connection. ● A slotted screwdriver with approx. 3 mm blade. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 48 3.3 Connecting the device Procedure Switch off the 24 VDC power sup- ply. Connect the wires of the power supply. Connect the connection terminal at the marked position. Secure the connection terminal with the marked screws. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 49: Connect Device To Networks

    Control level. Information on this can be found on the SIMATIC NET Manual Collection CD. The software package and the documentation are not included in the product package. Additional information You can find additional information on the Internet at: Technical Support (http://www.siemens.de/automation/csi_en_WW) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 50: Mounting The Ethernet Connector Strain Relief

    Ethernet connectors from the device. The Ethernet connector strain relief is available as an accessory. Procedure Screw the Ethernet connector strain relief at the bottom of the housing. Secure the Ethernet connectors using cable ties. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 51: Securing The Cables

    On the rear panel of the 9" and 12" devices, you will find fixing eyelets for cable ties for strain relief of the following connecting cables: ● Power supply cable ● RS232 cable ● USB cables Procedure Secure the connecting cables with cable ties at the points marked. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 52 Installing and connecting the device 3.3 Connecting the device SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 53: Commissioning The Device

    ● The protective conductor is connected. ● The connection cables are plugged in correctly. ● The following hardware is available for initial commissioning: – One USB keyboard – One USB mouse – A monitor/display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 54: Initial Commissioning

    To turn off the device, always select "Start > Shutdown". If the device is not going to be used for a long period of time after shutdown, set the on/off switch to position "0". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 55: Windows Security Center

    ● Real-time protection (Windows 7 only): Windows Defender displays warnings if spyware or possibly unwanted software is installed or executed on the computer. You will also receive a warning if programs attempt to modify important Windows settings. Configure the Security Center according to your requirements. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 56 Commissioning the device 4.3 Windows Security Center SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 57: Advanced Device Functions

    SIMATIC IPC DiagMonitor is available on CD (not included in the scope of delivery). This monitoring software comprises: ● The software for the stations to be monitored. ● A library for creating user-specific applications. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 58: Temperature Monitoring/Display

    The following reactions may be triggered if the watchdog is not retriggered within the set time: Reaction Option Trigger a PC reset Configurable Output DiagBase alarm messages None Note Contact Customer Support for a detailed description of the Watchdog functions. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 59: Battery Monitoring

    SIMATIC DiagBase and SIMATIC DiagMonitor diagnostic software determines the status of the backup battery. When the first warning level is reached, the battery for buffering CMOS data still has a remaining service life of at least one month. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 60: Enhanced Write Filter

    Write-protect drive C: Switching on ewfmgr c: -commitanddisable Write-protect drive C: disable (modified files are accepted) ewfmgr c: -commit Modified files on drive C: Accept ewfmgr c: Display information about the EWF drive ewfmgr c: /h Display help SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 61 Start > Control Panel > Date and Time, remove the check mark from the "Automatically adjust clock for daylight saving changes" check box. 3. Enable EWF again (ewfmgr c: -enable) and reboot the system. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 62: File-Based Write Filter

    Display the current FBWF status fbwfmgr /enable Enable FBWF after the next startup fbwfmgr /commit c: \Test.txt Write to protected files Adding/removing elements in the exception list: fbwfmgr /addexclusion C: \Test.txt Add file • SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 63: Buffer Memory Mram (Option)

    A memory window with a maximum size of of 512 KB can be displayed by means of PCI address register. The base address is initialized by the BIOS. A corresponding function is implemented in BIOS to enable the use of MRAM in WinAC RTX. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 64 Advanced device functions 5.4 Buffer memory MRAM (option) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 65: Operating The Device

    Operating the device Overview The device variants differ with regard to their dimensions and display size. The example in the following figure shows the front view of the 7" touchscreen variant. ① Display with touchscreen SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 66: Operating The Touch Screen

    Do not touch the screen in the following situations: • During the boot process • When plugging or unplugging USB components • While Scandisk is running • During active BIOS update SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 67: Configuring The Touch Screen

    3. Activate the option "Use eeprom storage". For Touch Controllers with EEPROM, the option box is pre-selected. The option box "Number of points" shows "3-point calibration". 4. Click the button "Calibrate". The calibration screen is displayed in the selected display. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 68 A removed touch controller is displayed in red. If the accuracy of this 3-point calibration is not sufficient, you can clear the "Use eeprom storage" option box and use the extended 25-point calibration instead. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 69: Extended Calibration

    The entry is confirmed by a check mark, the next selection is displayed. 7. Confirm all input prompts (arrows, or crosses in the center) until the complete screen has been calibrated. 8. Finally, confirm the input prompt "Confirm". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 70: Extended Touch Touch Functionality

    If "Extended touch" is activated, the extended touch functions of Windows 7 are also available, such as permanently touching the touch screen, which corresponds to the right mouse button function. In addition, the OSK is opened automatically at Windows logon and at the activation of entry fields. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 71: Using The On-Screen Keyboard

    1. Open the screen keyboard via the "TouchInput" symbol on the desktop. ① Button for changing the language 2. Place the cursor in any input field in any program. 3. Enter the desired characters via the screen keyboard. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 72: Setting The Display Brightness

    – Using the "Increase brightness (+)" and "Decrease brightness (-)" buttons. Note The minimum value for the brightness setting is 10%. If you select a value of less than 10% using one of the setting options, the brightness value is automatically set to 10%. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 73: Command Line Call

    PLUGINNAME. Notice: The respective numbers of the operable displays are shifted accordingly. Example: SetBrightness.exe –set 75 –device 2 Sets the brightness of display "2" to 75%. Only the –plugin FPPlugin.dll "FPPlugin.dll" plugin is loaded. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 74: Setting The Screen Saver

    During the start of Windows, the additional device is recognized by the service of the screensaver and integrated. Procedure 1. Open the "Screen Saver Settings" dialog with "Start > Settings > Control Panel > Display". 2. Select the "BbcScreenSaver" under "Screen Saver". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 75 6. Confirm the set values with "OK" or terminate the input with "Cancel" without saving the modified settings. Note If you set the value 0, the backlighting of all connected monitors is turned off. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 76: Winmove

    If the taskbar parameter "Auto-hide the taskbar" is not activated, windows which are moved downwards can disappear behind the taskbar, even if the "WinMove" parameter "check region" is activated. ● With the "visible" parameter, you display or hide the "WinMove" window. Use "exit" to end WinMove. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 77: Device Expansion And Parameter Assignment

    ● All cables have been disconnected from the device. ● The device has been removed from the control cabinet. ● A T10 screwdriver Procedure - opening IPC277D 7" and 9" Remove the marked screws Remove the rear panel. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 78 Procedure: opening IPC277D 12", 15" and 19" Remove the marked screws Remove the rear panel. Procedure - closing the device. Close the device in reverse order. See also Replacing drives of IPC277D 7" and 9" (Page 88) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 79: Inserting And Removing Compactflash Cards

    ● A CF memory card that is approved for industrial use. This device is only approved for operation with CF memory cards as of product version Note Always replace the CF memory card with a card of the same product version. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 80 Push the memory card into the slot. The memory card is properly inserted if you can close the cover without noticeable re- sistance. Close the cover. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 81: Device Maintenance And Repairs

    Cleaning the Device Front 1. Switch off the device. 2. Dampen the cleaning cloth. 3. Spray the cleaning agent on the cloth and not directly on the device. 4. Clean the device with the cleaning cloth. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 82: Recycling And Disposal

    Therefore, make sure you take precautionary measures even when you open the device, for example, when opening device doors, device covers or the housing cover. For more information, refer to the section "ESD Guideline (Page 112)" SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 83 Tools to open the device, see section "Opening the device". You can make repairs on the device with the following tools: ● T20 screwdriver for protective conductor connection ● T10 screwdriver for all of the remaining screws SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 84: Maintenance

    The replacement device is always supplied without mass storage media (CF and/or SSD). • If you order a replacement device, remove all storage media (SSD, CompactFlash card etc.) from your device and insert them into the new device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 85: Replacing The Backup Battery

    • Label the battery container with "Used batteries and rechargeable batteries". Requirement ● The device is disconnected from the power supply. ● The device is opened. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 86 Pull the hook in direction of the arrow. Push the battery holder in the direction of the arrow while keep- ing the hook pulled. Disconnect the battery plug Remove the battery and battery holder. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 87 Follow the steps in reverse to install the replacement battery and close the device. Remember the following: Pull the connecting cable through the opening underneath the marked web. Insert the battery into the battery holder. See also Open the device. (Page 77) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 88: Replacing Drives Of Ipc277D 7" And 9

    "Replacing the backup battery (Page 85)". Note Do not remove the battery connector. If you remove the battery connector, you will have to reinstall the BIOS. Remove the battery holder. Remove the marked screws. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 89 Remove the drive and put it aside. Remove the marked screws. Put down the drive carrier panel and the drive. Procedure - installation For installation, follow these steps in reverse and close the device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 90: Replacing The Drive Of An Ipc277D 12", 15" And 19

    Do not remove the battery connector. If you remove the battery connector, you will have to reinstall the BIOS. Remove the battery holder. Remove the marked screws. Put down the backup battery. The marked connector must remain connected Pull off the connector. Remove the drive and put it aside. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 91 Device maintenance and repairs 8.3 Installing and removing hardware Remove the marked screws. Put down the drive carrier panel and the drive. Procedure - installation For installation, follow these steps in reverse and close the device. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 92: Installing The Software

    The Restore DVD is included in the scope of delivery when you have ordered a device with operating system. The DVD contains an image file with the original software package: Operating system with installed hardware drivers and monitoring software, e.g. DiagBase. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 93: Restoring The Factory State

    Press <F12> to go to Boot Manager After initialization, a boot menu is displayed. 6. Select the optical drive using the cursor keys. Example: USB-ODD : Optical Disk Drive 7. Follow the on-screen instructions. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 94: Installing Windows Xp

    Press F12 to go to Boot Manager After initialization, a boot menu is displayed. 8. In the boot menu, select the optical drive using the cursor keys. Example: USB-ODD : Optical Disk Drive 9. Confirm the selection by pressing ENTER. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 95 Information on partitioning of the data carrier in the factory state is provided in the following table. Partition Name Size File system First SYSTEM 25 GB NTFS not compressed Second DATA Remainder NTFS not compressed SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 96: Installation Of Windows 7

    After a few seconds, you will see the "Install Windows" installation program. 9. Now follow the instructions in the installation program. You can find additional information on this in the section: "Install Windows" installation program. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 97 Note the information in Section "Information for systems with RAID, AHCI, or SAS controllers (optional)". Drive options For display of additional functions that you can use to set up the data carriers, (advanced) see figure "Windows installation window "Drive options (advanced)"". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 98 Deleting a partition Extend Changing the partition size Format Formatting a partition Creating new partitions Identification for error messages, for example, if the data carrier was not format- ted in the required "NTFS" format. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 99 1. Connect the USB stick with the controller driver to the device. 2. Start the "Install Windows" installation program as described above. 3. Select "Load Drivers" in the Windows installation window. 4. Select the respective driver on the USB stick. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 100: Setting Up The Language Selection By Means Of The Multilanguage User Interface (Mui)

    Changing the settings for language, region and formats of a registered user account 1. Choose: "Start > Control Panel > Clock, Language, and Region > Regional and Language Options" 2. You can make the desired changes in the "Formats" and "Location und Keyboards and Languages" tabs. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 101 1. Choose: "Start > Control Panel > Clock, Language, and Region > Regional and Language Options" 2. Select the "Keyboards and Languages" tab. 3. Click the "Install/uninstall languages" button and make the required changes. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 102: Partitioning Data Media

    3. Partition WinCCMB 32 MB NTFS (compressed) Only for devices with bundle software To restore the original partition of the factory state, we recommend you use the software tool "SIMATIC IPC Image & Partition Creator". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 103: Partitions Under Windows 7 Ultimate And Windows Xp Professional

    Back up your data before you change partitions. Requirement You are logged on as an administrator. Reduce partition 1. Click with the right mouse button on the partition to be reduced and click on "Reduce size". 2. Follow the instructions. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 104: Adapting Partitions In Windows Xp And Windows Embedded Standard 2009

    Adapting partitions in Windows XP and Windows Embedded Standard 2009 In order to adapt partitions, we recommend you use the software tool SIMATIC IPC Image & Partition Creator. Detailed information about using this tool is available in the manufacturer documentation. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 105: Drivers And Software

    1. If your device has no CD/DVD drive, connect an external USB CD/DVD drive to a USB port. 2. Insert the "Documentation and Drivers" CD/DVD provided. 3. Start the "START" program. 4. Select "Drivers" from the index. 5. Select the device and operating system. 6. Select the desired driver SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 106 7. Open the folder with the driver data by clicking on the link next to "Driverpath". 8. Start the setup program in this folder. Note For a new installation of Windows operating systems, the chipset driver must be installed before all other drivers, if required. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 107: Installing Updates

    Windows Embedded Standard / Windows XP Professional / Windows 7 Ultimate. This tool provides comfortable and efficient functions for backup and restoring the full content of CompactFlash cards, hard disks, and of individual partitions (images). SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 108 8.4 Installing the software SIMATIC IPC Image & Partition Creator supports the burning of DVD media only. You can order the tool using the Siemens online ordering system (http://www.siemens.com/automation/mall). For more information about SIMATIC IPC Image & Partition Creator, refer to its product documentation.

  • Page 109: Technical Specifications

    The device meets the requirements and safety specifications of the EMC Directive 2004/108/EC "Electromagnetic Compatibility". EC Declaration of Conformity The corresponding documentation is available on the Internet at: SIMATIC IPC277D certificates (http://support.automation.siemens.com/WW/view/en/48958258/134200). DIN ISO 9001 certificate The Siemens quality management system for all production processes (development, production and sales) meets the requirements of DIN ISO 9001:2000.
  • Page 110 바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다. Identification for Eurasion Customs Union ● EAC (Eurasian Conformity) ● Customs union of Russia, Belarus and Kazakhstan ● Declaration of conformity according to Technical Regulations of the Customs Union (TR SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 111 Shipbuilding approvals The following shipbuilding approvals are provided for the device. After acceptance, the certificates will be made available under the following address on the Internet: SIMATIC IPC277D certificates (http://support.automation.siemens.com/WW/view/en/48958258/134200). ● ABS American Bureau of Shipping (USA) ● BV Bureau Vertias (France) ●...

  • Page 112: Directives And Declarations

    The consequences are incalculable and range from unforeseeable malfunctions to a total failure of the machine or system. Avoid touching components directly. Make sure that persons, the workstation and the packaging are properly grounded. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 113 There is no equipotential bonding without grounding. An electrostatic charge is not discharged and may damage the ESD. Protect yourself against discharge of static electricity. When working with electrostatic sensitive devices, make sure that the person and the workplace are properly grounded. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 114 This way, the discharge energy does not reach and damage the sensitive components. – Discharge your body electrostatically before you take a measurement at a module. Do so by touching grounded metallic parts. Always use grounded measuring instruments. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 115: Dimension Drawings

    Technical specifications 9.3 Dimension drawings Dimension drawings 9.3.1 Dimensional drawing IPC277D, 7" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 116: Dimensional Drawing Ipc277D, 9" Display

    Technical specifications 9.3 Dimension drawings 9.3.2 Dimensional drawing IPC277D, 9" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 117: Dimensional Drawing Ipc277D, 12" Display

    Technical specifications 9.3 Dimension drawings 9.3.3 Dimensional drawing IPC277D, 12" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 118: Dimensional Drawing Ipc277D, 15" Display

    Technical specifications 9.3 Dimension drawings 9.3.4 Dimensional drawing IPC277D, 15" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 119: Dimensional Drawing Ipc277D, 19" Display

    Technical specifications 9.4 Technical specifications 9.3.5 Dimensional drawing IPC277D, 19" display SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 120: Technical Specifications

    The generation of the supply voltage with the line-side power supply must be realized as safety extra-low voltage with safe electrical isolation, isolated according to IEC 60364-4-41 or as SELV according to IEC/UL/EN/DIN-EN 60950-1 and LPS/NEC Class 2. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 121 16 GB • Floppy and CD-ROM drive External, can be connected via USB port USB stick External, can be connected via USB port Only to USB port of the device, not via USB hub SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 122 For unique labeling, the LAN interfaces are numbered on the enclosure. The numbering by the operating system can differ. Teaming can be set and initiated in the configuration interface. In teaming operation, jumbo frames, e.g. for the camera application, are not supported. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 123: Environmental Conditions

    5 to 9 Hz: 3.5 mm 9 to 500 Hz: 9.8 m/s Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29 Operation 50 m/s , 30 ms Storage/transport 250 m/s , 6 ms SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 124: Shipbuilding

    Maximum permitted current consumption at the USB ports Auxiliary components Maximum permitted power consump- Max. total power tion +5 V USB device High current 500 mA 6 W (for all USB devices) Low current 100 mA SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 125: Power Consumption

    The peak value of the inrush current depends on the input voltage and the impedance of the 24 V source; peak currents in excess of 2.0 A are possible. This will not have a negative impact on device functionality. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 126: Power Supply Ipc277D, 12", 15" And 19" Display

    Basic device ATOM 1.3 GHz / 2 GB RAM with 24 W 36 W 36 W display Maximum USB extension Max. 6 W Max. 6 W Max. 6 W USB port, front Max. 2.5 W Max. 2.5 W SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 127: Dc Power Supply

    The peak value of the inrush current depends on the input voltage and the impedance of the 24 V source; peak currents in excess of 4.5 A are possible. This will not have a negative impact on device functionality. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 128: Hardware Description

    3 x external USB USB 1.1/2.0 Only two of these USB ports may be operated simultaneously in high-current mode. Front High-current USB 1.1/2.0 Ethernet exter- 2 x RJ45 10/100/1000 Mbps For 15" and 19" devices SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 129: Serial Interface

    BI_DD+ Bidirectional data D+, input/output BI_DD– Bidirectional data D–, input/output Short description Meaning LED 1 Off: 10 Mbps Lit green: 100 Mbps Lit orange: 1000 Mbps LED 2 Lit orange: Connection established Flashes: Activity SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 130: Usb 2.0 Port

    Technical specifications 9.5 Hardware description 9.5.2.4 USB 2.0 port Short description Meaning USB_P5V_fused (O) +5 V, fused USB_D0M (I/O) Data+ USB_D0P (I/O) Data– USB_GND SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 131: System Resources

    ISA exclusive IRQ3 Free IRQ4 Free IRQ5 Free IRQ6 Reserved IRQ7 Free IRQ8 Realtime clock ISA exclusive IRQ9 ACPI-SCI (system control interrupt) IRQ10 ISA exclusive (CAN) IRQ11 Free IRQ12 PS/2 mouse controller emulation ISA exclusive SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 132 USB Client Controller USB OHCI Controller 4, 5, 6 USB EHCI Controller 2 UART Controller 1 (COM3) UART Controller 2 (COM4) UART Controller 3 (COM5) UART Controller 4 (COM6) IRQ20 Embedded media and graphics PCI shared SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 133: Input/Output Address Areas

    PCI register address: PCI register content: Length of the memory area MRAM base address register MRAM memory address (default) 8010 2010h 9040 0000h 80000 h Address is assigned dynamically (depending on device configura- tion) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 134: Bios Description

    On completion of the POST, the BIOS gives you the opportunity of starting the SETUP program. The following message appears: PRESS F2 go to Setup Utility Press F12 go to Boot Manager 2. Press the <F2> key as long as the BIOS prompt appears on the screen. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 135: Bios Setup Menus

    SETUP item from the "Item-specific help" part of the respective menu. Example of the BIOS SETUP menu ① ④ Header Help window ② ⑤ Menu bar Command line ③ Selectable submenu SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 136 Specify startup characteristics of the device, e.g. in response to specific events, in case of power failure, or in power saving mode. Boot Set boot options, e.g. the boot priority. Version Device-specific information (e.g. product version) Exit Close and save SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 137: Main Menu

    [+] and [–] keys to modify the time setting Hour: Minute: Second and for the date Month/Day/Year. You can navigate through the entries within the date and time fields (for example, from hour to minute) using the Enter key. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 138: Advanced Menu

    Advanced menu Advanced menu settings Entry Meaning Peripheral Configuration Configuration of components on the mother- board. Video Configuration Configuration of the graphics interface Chipset Configuration Extended chipset configuration. CPU Configuration Configuration of CPU parameters SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 139 Enable (Enabled) the onboard Ethernet 1 interface. Ethernet 1 address Display the MAC address of Ethernet 1 Onboard Ethernet 2 Enable (Enabled) the onboard Ethernet 2 interface. Ethernet 2 address Display the MAC address of Ethernet 2 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 140 Sets the screen brightness from 10 to 100 percent in the case of non-Windows operating systems. During the start, screen brightness is automatically set to 50% so that you can set the BIOS Setup. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 141 Technical specifications 9.6 BIOS description Advanced menu > "Chipset Configuration" submenu Entry Meaning HPET - HPET Support Enable High Precision Event Timer Advanced menu > "CPU Configuration" submenu SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 142 Enable the power saving modes of the processor. P-States (IST) Enable the performance modes of the processor. HT Support Auto: Use hyperthreading, if available. • Disabled: Hyperthreading disabled. • VT Support Enable or disable virtualization functionality "Vanderpool Tech- nology". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 143: Security Menu

    Read access only to all fields of the InsydeH20 Setup. Limited Only certain fields can be edited. Full All fields can be edited, with the exception of the "Supervisor password". Clear user pass- Deletes the user password. word SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 144: Power Menu

    This function indicates to the system whether a CMOS battery is being used. Enable this function with "Yes" if a CMOS battery has been installed. Disable this function with "No" if no CMOS battery has been installed. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 145: Boot Menu

    On = Enable numeric keypad on right Off = Disable numeric keypad on right (= navigation) USB Boot Allow/Do not allow booting of inserted USB devices. PXE Boot to LAN 2 Enable or disable booting of the LAN2 via PXE. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 146 Submenu for setting the boot order of component groups relative to one another (for Boot menu mode "Normal" only) Hard disk drive Submenu for setting the boot order within the group of drives (for Boot menu mode "Normal" only) SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 147 Setting the boot order within the group of optical drives Setting the boot order within the group of USB drives Others Setting the boot order within the Others group, for example, Remote Boot device SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 148 Technical specifications 9.6 BIOS description "Hard Disc Drive" sub-submenu SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 149 "Legacy Boot Type Order (Advance)" submenu BIOS sets bootable components that are disconnected and reconnected on the PC between the boot processes to the first position in the "Advance" setting. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 150 9.6 BIOS description "Legacy Boot Type Order (Placeholder)" submenu BIOS sets bootable components that are disconnected and reconnected on the PC between the boot processes to their original boot position in the "Placeholder" setting (Placeholder Boot). SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 151: Version Menu

    9.6 BIOS description 9.6.3.7 Version menu The menu shows the versions of important device-specific functions, for example, Option ROM. Keep this information at hand if customer support has technical questions about your system. Example SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 152: Exit Menu

    The BIOS settings are retained with <F9> "load defaults". Manufacturer This setting is only used for production purposes. Do not use. Load <Stand- Loads the values of the respective profile. ard|User|Manufacturer> profile Save user profile Saves the user profile values. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 153: Bios Setup Default Settings

    Default settings Local settings Main System Time hh:mm:ss System Date MM/DD/YYYY System parameters Default settings Local settings Advanced>Peripheral Configu- ration Onboard Ethernet 2 Enabled System parameters Default settings Local settings Advanced>Video Configuration Panel brightness <85%> SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 154 Disabled CMOS battery present System parameters Default settings Local settings Boot Quick Boot Enabled Quiet Boot Disabled Boot delay POST errors All without keyboard Numlock USB Boot Disabled PXE Boot to LAN 2 Disabled SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 155 Default settings Local settings Boot > Legacy Boot Type Order Boot Menu Mode Placeholder USB FDC USB ODD USB HDD SATA0 SSD PXE Boot System parameters Default settings Local settings Exit Current profile Standard SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 156: Alarm, Error And System Messages

    Hard disk reports pending failure through S.M.A.R.T. Real-time clock error Battery is weak Real-time clock has lost power Time corrupt due to discharged battery CMOS battery error Battery exhausted CMOS battery failed Battery empty or not inserted SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 157: Functional Scope In Windows

    Available Administrative Tools Available SMS Advanced Client Not available Remote Desktop Available V6.0 Remote Assistance Available .NET Framework Not available ASP.NET Not available Windows .NET Messenger Available V4.7 Code pages/User Loca- Selection available tion/Keyboard SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 158 Activation of "HORM" and creation of a "Hibernate File" Activate "HORM" as follows to use the "Hibernate" function: EWFMGR C: /activatehorm "Hibernate" is activated following a restart. The system then always boots from this file. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 159: Windows Embedded Standard 7

    Remote Client Available Available Remote Desktop Available Available SIMATIC IPC DiagBase Available, V1.4 Available, V1.4 Speech Available Not available System Management Administra- Available Available tive Tools Telnet Server Available Available User Account Control Available Available SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 160 Note the licensing agreements for Windows Embedded Standard 7. Additional information on language selection is available in the section "Setting up the language selection by means of the Multilanguage User Interface (MUI) (Page 100)". SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 161: Technical Support

    You can find additional information and support for the products described on the Internet at the following addresses: ● Technical support (http://www.siemens.de/automation/csi_en_WW) ● Support request form (http://www.siemens.com/automation/support-request) ● After-sales information system for SIMATIC PC / PG (http://www.siemens.com/asis) ● SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal) ● Your local representative (http://www.automation.siemens.com/mcms/aspa- db/en/Pages/default.aspx)

  • Page 162: Problem Solving

    "chkdsk" is not function- EWF (Enhanced Write Filter) has Deactivate the EWF or use an alternative method to been activated. The "chkdsk" com- "chkdsk". mand is not supported if the EWF has been activated. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 163: Markings And Symbols

    Opening for Kensington lock opening Attention ESD (Electrostatic sensitive Warning of hot surface device) Operator controls Symbol Meaning Symbol Meaning On/off switch, without electrical isola- Eject CD/DVD tion On/off switch, without electrical isola- tion SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 164: Certificates, Approvals And Markings

    CE markings for European countries Marking of Federal Communications Commission for the USA EFUP (Environment Friendly Use Approved for Korea Period) marking for China Test mark of the Underwriters La- Disposal information, observe the boratories local regulations. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 165: Interfaces

    DVI-D interface Line In LAN interface, not approved for con- Line Out necting WAN or telephone Serial port Microphone input USB port Universal Audio Jack USB 2.0 high-speed port Headphone output USB 3.0 super-speed port SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 166 Markings and symbols B.5 Interfaces SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 167: List Of Abbreviations

    Data carrier signal detection Direct Memory Access Disk Operating System Deutsche Gesellschaft zur Zertifizierung von Qualitätsmanagement mBH Data Set Ready Ready for operation Data Terminal Ready Data terminal is ready Digital Versatile Disk Electrostatic Sensitive Devices SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 168 Optical Disk Drive Personal computer Peripheral Component Interconnect High-speed expansion bus PCIe Peripheral Component Interconnect ex- High-speed serial, differential full- press duplex PtP interface with high data rate. Programming device POST Power On Self Test SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 169 VT-D Virtualization Technology for Directed I/O Enables the direct assignment of a device (e.g. network adapter) to a virtual device. Watchdog Program monitoring with error detec- tion and alarming. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 170 List of abbreviations SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 171: Glossary

    Cache High-speed access buffer for interim storage (buffering) of requested data. CE marking Communauté Européene The CE mark confirms compliance of the product with corresponding EC Directives, for example, with the EMC Directive. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 172 The data are stored in a configuration file and enable the operating system to load the correct device drivers and configure the correct device parameters. . If changes are made to the hardware configuration, the user can change entries in the configuration file using the SETUP program. . SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 173 10/100/1000 Mbps. Execute Disable Capability Hardware implementation that prevents mutual memory accesses by programs and applications. It is only effective when all relevant system components, such as processors, operating systems and applications are supported. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 174 Intel Active Management Technology This technology permits the diagnostics, management and remote control of PCs. It is only effective when all relevant system components, such as processors, operating systems and applications are supported. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 175 Legacy Boot Device Conventional drives can be used as USB devices. License key The license key represents the electronic license stamp of a license. Siemens provides the license keys for protected software. License key disk The license key disk contains the authorizations or license keys required to enable protected SIMATIC software.
  • Page 176 Restricted Access Location: Installation of the device in a production facility with restricted access, for example, a locked control cabinet. Recovery CD Contains the tools for configuring hard disks and the Windows operating system. Reset Hardware reset: Reset/restart of the PC using a button/switch. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 177 This design makes SSDs more rugged, provides shorter access times, low energy consumption and rapid data transfer. STEP 7 Programming software for the creation of user programs for SIMATIC S7 controllers. Troubleshooting Error cause, cause analysis, remedy SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 178 Wake on Local area network. This function allows the PC to be started via the LAN interface. Warm restart The restart of a computer after a program was aborted. The operating system is loaded and restarted again. The CTRL+ ALT+ DEL hotkey can be used to initiate a warm restart. SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

  • Page 179: Index

    EC Declaration of Conformity, 109 chkdsk, 162 Enhanced Write Filter, 60 Cleaning Agents, 81 ESD, 112 COA label, 32 ESD Directive, 112 Components sensitive to electrostatic charge, 112 Ethernet, 49, 128 Condensation, 30 EWF (Enhanced Write Filter), 60 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 180 EC Declaration of Conformity, 109 Windows 7, 103 Memory card Windows Embedded Standard 2009, 102 Inserting, 79 Windows XP, 103 Removing, 79 Pixel, 28 Memory medium, 121 Defective pixel, 28 Messages On the screen, 156 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 181 Partitioning a drive, 102 Startup, 156 Windows Security Center, 55 Static electricity Windows XP Protective measures, 114 Installation, 94 System Date, 137 Partitioning a drive, 103 System partition, 93 Windows XP Professional Data backup, 107 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...
  • Page 182 Index WinMove, 76 SIMATIC IPC277D Operating Instructions, 12/2016, A5E03409486-AE...

Table of Contents