Realignment - Kenwood TKR-740 Service Manual

1. M odes
User Mode
PC Mode
Firmware Programming Mode
M ode
User Mode
PC Mode
PC Programming Mode
PC Test Mode
PC Tuning Mode
Firmware Programming Mode
2. How to Enter Each M ode
M ode
User Mode
PC Mode
Firmware Programming Mode

REALIGNMENT

Use this mode for normal operation.
Use this mode to make various settings by means of the FPU through the RS-232C port.
Use to read and write frequency data and other features to and from the Repeater.
Use to check the Repeater using the PC.
This feature is included in the FPU.
Use to tune the Repeater using the PC.
This feature is included in the FPU.
Use when changing the Firmware program of the flash memory.
Power ON.
Received commands from PC.
[PF1] key + Power ON (one second).
PC Programming Mode
PC Test Mode
Function
Operation
TKR-740
PC Tuning Mode
13