Changing The Engineer Code - EUROSEC CP8L Installation Instructions Manual

ENGINEER.qxd 16/10/01

Changing the Engineer code

The engineer code may only be changed by use of the current engineer code. If the engineer code
starts with a 9 the code will be 'locked in' defaulting the panel will have no effect on the engineer code.
To program the engineer code proceed as follows:-
1) Enter the Engineer Code (1234 default) followed by No
the display will show:-
2) Press No the display will show:-
3) Press No the display will show:-
4) Press Yes the display will show:-
5) Press No the display will show:-
6) Press Yes the display will show:-
7) Press No the display will show:-
8) Enter the four digit code you require followed by Yes
the display will show:-
9) Press 0 three times to return to the Unset condition
13:14 Page 21
P P a a g g e e 2 2
P P a a g g e e 2 2
1 1
1 1
Do You Want to. .
Test ?
Do You Want to. .
Delete Zone ?
Do You Want to. .
Select Options ?
Do You Want to. .
Program Chime ?
Do You Want to. .
Program Codes ?
Code
####
Code
0000
Code
####