Table of Contents
Advertisement
9.3.
9.3.1.
9.3.2.
9.3.3.
38
COM600 series 5.0
GOOSE Analyzer Operator's Manual
For each interval, the analyzer sums up:
•
Received network packets
•
Received network bytes
•
Received GOOSE packets
•
Received GOOSE bytes
•
Received GOOSE events for users
IED analyzers
IED analyzer group
The IED analyzer group is designed to analyze IED wide GOOSE with comparison to
the corresponding configurations in the SCD.
The following analyzers belong to this group:
•
GOOSE bus analyzer
•
Statistic analyzer
GOOSE bus analyzer
GOOSE bus is a unique representation of each GOOSE sending IED. It is used to mirror
the transmission status of GOOSE messages.
Each GOOSE bus can have three statuses:
•
Unknown: unknown status, which might mean problems have been found with
GOOSE Analyzer in COM600 (see 9.4.7, Timeout (flow status) analyzer).
•
Normal: transmission of GOOSE packets is according to its configuration and thus
treated as normal (marked with green).
•
Alarm: indicates that the transmission of GOOSE by the sending IED is abnormal,
when the timeout analyzer shows timeout.
The analyzer is a synergy of different timeout analyzers within the same server of the
IED.
Statistic analyzer
The analyzer traces the GOOSE load from the specific sending IED. It calculates the
GOOSE load from the specific sending IEDs based on the GOOSE control block refer-
ences during the configured interval.
For each interval, the analyzer sums up respectively:
•
Received GOOSE packets
•
Received GOOSE bytes
•
Received GOOSE events for users
1MRS757546
Advertisement
Table of Contents
