How To Clean; Disassembling And Cleaning The Incubator - Rcom Reptile MAX 60 User Manual

Disassembling and Cleaning the Incubator

Be sure to take off power cord before cleaning the
incubator.
▶ In case of immediately turning off the incubator progressing
incubation with a high humidity and leaving it at the state
that the cover was closed, as the humidity remaining in
the inside evaporates and is attached to the electric device,
it may be a cause of breakdown. Be sure to remove inside
humidity after getting off transparent window to use machine
the most safely.
▶ Remove main controller from view window.
▶ Sensor unit is connected to the connector to be changed
easily in case of breakdown.
Never wash sensor unit with water. It may be a cause
of breakdown, and it may decrease the life span of sensor.
▶ Wash the outside of main controller,
transparent window and sensor cleanly
with a soft cloth.
▶ Wash container tray, main body(bottom)
cleanly with warm water and dry them
at cool place.
▶ Assemble again in the opposite order separated to keep it.
DIGITAL INCUBATOR

5. How to Clean

(1) Disassembling and
Cleaning the Incubator
Power cord
Sensor
Unit
15