Rcom PRO PLUS 10 User Manual

Rcom PRO PLUS 10 User Manual

Bird egg incubator

Advertisement

North America Sales & Service www.RcomCo.com

1. COMPOSITION

3. INCUBATION /
FUNCTION SETUP
The success of incubation may vary according to different factors.
The manufacturer and distributor are not responsible for failure of incubation of costly eggs, loss of life, property damage due to negligence of user,
remodeling, painting, modification of purpose of use or power failure. When incubating parrot or costly birds please verify the internal temperature
(adjust) before use. Please read carefully the instruction manual before use to avoid failures.
Explanation on Signs
Means Forbidden.
Means Do not disassemble.
Means Do not contact.
Means the helpful information or reference
for using the product.
1. COMPOSITION

Power-related precautions

Do not use damaged power
cord, plug or loose socket.
▶ It may cause electric
shock or fire.

Precautions on installation and use

Do not install the product in
dusty or unclean places.
▶ If the dust or any alien
substance is introduced to the
interior they may cause electric
shock or fire.
Do not block the ventilation
hole with cover.
▶ Lack of ventilation may
cause an increase in internal
temperature and result in
breakdown or fire.
Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual
Direct access to LIST
(Please click on the orange boxes below.)
(1) Safety precautions / (2) Introduction on Rcom 10 / (3) Name of each part and basic composition /
(1) What is incubation room? / (2) Preparation of incubation / Start incubation / (3) APS (Assembly / Speed control /
Tube replacing / How to maintain and clean)
(1) function setup (2) Moist and ventilation during incubation / (3) Management after incubation / Dew condensation
(1) How to disassemble and clean
(1) FAQ / (2) Trouble shooting and measures / (3) Product data / Product warranty / (4) Guide on customers' damage compensation
ATTENTION: Means the errors which may produce failure of incubation, trouble or damage that
require attention.
Means the matters to obligatorily observe.
Means Please disconnect the power plug from the power source.
Means the earthing to prevent electric shock.
Please pay attention on following terms when using the product.
Do not pull the power cord to
Do not disconnect the plug
disconnect nor touch the plug
during incubation.
with wet hands.
▶ The egg may die due to
▶ It may cause electric
suspension of incubation.
shock or fire.
Please pay attention on following terms when using the product.
Do not install the product
Do not install the product in
under direct sunlight.
wet or moist places.
▶ It may cause electric
▶ If the water is introduced
shock or fire.
to the interior it may cause
electric shock or fire.
Do not have any heating
Do not place on a moving
device near the power cord.
shelf, inclinated place, unstable
▶ When the cord sheath is
place or any place with severe
melted it may cause fire or
vibration.
electric shock.
▶ Product may fall resulting
in breakdown or damage.
The vibration may reduce the
product life or cause fire.
Means the possibility of injury or material loss of equipment when the
designated instruction is not observed.
Do not focibly bend the power
plug or cord, nor put any heavy
object on them which may
cause damage.
▶ It may cause electric
shock or fire.
Avoid too cold or hot place
and do not dispose the
product near candles, mosqui
to coil, cigarette fire or any
heating equipment.
▶ It may cause fire.
Do not overturn the product.
▶ The water within the
main body may pour onto
electronics or the sight glass
may be damaged.
Ver.1.0
(1) Safety precautions
Do not connect on socket with
many extensions nor by
connecting the power plugs.
▶ It may cause fire.
Do not use any other part than
assigned ones.
▶ It may cause breakdown or
failure of incubation.
Do not let a child assemble
the product. Must be
assembled by a competent
adult.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO PLUS 10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rcom PRO PLUS 10

  • Page 1 Ver.1.0 Direct access to LIST (Please click on the orange boxes below.) (1) Safety precautions / (2) Introduction on Rcom 10 / (3) Name of each part and basic composition / 1. COMPOSITION (4) Name and function of operational parts (1) What is incubation room? / (2) Preparation of incubation / Start incubation / (3) APS (Assembly / Speed control / 2.
  • Page 2 The Rcom 10 automatically creates and maintains an optimal incubation environment using state-of-the-art technology digital control methods and has been designed for easy and simple use. The Rcom 10 provides the optimal environment, however the user needs to carefully observe and adjust environmental...
  • Page 3 Composition of Automatic Pumping System (APS) See video on how to assemble and operate Automatic pumping system(APS). 1. COMPOSITION (4) Name and function of operational parts Name and function of operational parts Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 4 Also the place must not have direct ventilation as air conditioner to the device. If the temperature of hatching room is lower than setup value there might be misted or dripping water inside due to dew condensation. Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 5 ※ The life of humidification pad is 4~6 months under normal usage conditions but if the water quality is improper the life might be reduced. (Please use distilled or purified water for moisturizing.) ※ The humidification pad can be purchased separately. Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 6 IN side to the PET water bottle. In case of PRO PLUS 10 model do not pour water to the water hole in the lower part of the main body as it includes automatic pumping system (APS).
  • Page 7 ▶ Damage silicone tubing will reduce the pumping volume or pumping may cease. In this case, please replace the silicone tubing. The silicone tube sent with the initial product should be used in the product, also you may purchase it through Rcom or the place where you purchased product.
  • Page 8 The egg rotation is suspended 3 days before hatch. This is automatically programmed to help hatching and not a fault of the device. ▶ If Candling sign(button) was pressed during setup you can go back to previous step. Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 9 It is a function which enables the continued operation of the device with the currently setup incubation conditions regardless of number of incubation days. How to manually Humidify and Supply Water in Rcom PRO 10 ▶ Pour water into water hole of the main body (lower part). The connected silicone hose will supply water to the interior.
  • Page 10 ▶ By pressing the + and OK buttons for 3 seconds at the same time the OPTN(option) sign appears. ▶ Select the 9.I.nfo by pressing + or - button and press OK to display basic information of the device. How to leave Optional Function Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 11 When pressed OK button it is suspended and the power sign is immediately disappears. PRO PLUS 10 : How to forcibly operate humidifying pump ▶ The pump motor may be tested by pressing the + button for 5 seconds during operation.
  • Page 12 ▶ Hatching within the incubator can cause a build up of germs with possible cross contamination of bacteria, and the dust, feather dander, egg shells and excrement may produce a breakdown of the incubator which is not covered under warranty. Please consider the Rcom Suro eco hatcher specifically for hatching.
  • Page 13 The Rcom products are manufactured under strict quality management with precise equipments, but there may be some defects in the product during the distribution. If there is any problem please contact to the Service center or Distributor of RCOM. We will do our best to resolve the problem as soon as possible.
  • Page 14 / Breakdown due to manner of use not mentioned in the instruction manual / If the customers' fault is clear. North America Sales & Service www.RcomCo.com Rcom will never renounce our philosophy regarding design, class, price, value, and technology focus. Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 15 Ver.1.0 Direct access to LIST (Please click on the orange boxes below.) (1) Safety precautions / (2) Introduction on Rcom 10 / (3) Name of each part and basic composition / 1. COMPOSITION (4) Name and function of operational parts 2.
  • Page 16 The Rcom 10 automatically creates and maintains an optimal incubation environment using state-of-the-art technology digital control methods and has been designed for easy and simple use. The Rcom 10 provides the optimal environment, however the user needs to carefully observe and adjust environmental...
  • Page 17 ① Heater operation lamp : When heating is on, the lamp glows on. ② Temperature adjustment dial : use this to adjust set temperature. 2. BEFORE USE (1) What is incubation room? What is Hatching room? Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 18 ▶ Attain correct temperature before placing eggs into incubator. If you want to adjust to specific temperature, use the provided + shape driver to turn the temperature adjustment volume and so adjust the temperature. Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 19 ▶ When installed the particularly purchased rotation unit, if the user wants to suspend rotation, the user needs to remove the egg rotation disk or tray. How to manually moisturize & supply water Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...
  • Page 20 ▶ Hatching within the incubator can cause a build up of germs with possible cross contamination of bacteria, and the dust, feather dander, egg shells and excrement may produce a breakdown of the incubator which is not covered under warranty. Please consider the Rcom Suro eco hatcher specifically for hatching.
  • Page 21 The Rcom products are manufactured under strict quality management with precise equipments, but there may be some defects in the product during the distribution. If there is any problem please contact to the Service center or Distributor of RCOM. We will do our best to resolve the problem as soon as possible.
  • Page 22 Troubleshooting and measures For more detailed self-troubleshooting, verify the "Troubleshooting" category in the Rcom web site. Symptom Estimated cause (possibility) Measures ▶...
  • Page 23 Breakdown due to use of the incubator as brooder device (developer) / Breakdown due to incorrect device control / Breakdown due to manner of use not mentioned in the instruction manual / If the customers' fault is clear. North America Sales & Service www.RcomCo.com Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual...

This manual is also suitable for:

Pro 10Eco plus 10Eco 10

Table of Contents