Signaling Of The Console Lcd300/S - Tecnoalarm TP8-96 VIDEO User Manual

Signaling of the LCD300/S console
The LCD300/S console permits arming/disarming of the programs, it also permits interaction with the remote controls,
moreover users who are enabled can enter the programming menus.
The console provides two groups of LED; the first, below the display, represents general signaling of the control panel;
the second, below the keypad, is composed of 15 pairs of LED for viewing of the status of the associated programs.
General alarm LED -
The system constantly checks its functions, any trouble is immediately signaled. The LED is
blinking while the alarm is active. As soon as the alarm stops, the LED becomes lit to signal alarm
memory.
The signaling of alarm memory continues until it is reset. The general alarms are stored in the event
buffer.
If the LED is blinking slowly, it signals a general alarm. If it is blinking quickly, it signals a GSM
trouble.
TP8-96 VIDEO User manual
Ver.1.0 - 03/11
1-9