Technical Specifications; What This Chapter Contains - ABB PQFM Instruction Manual

—

12 Technical specifications

12.1 What this chapter contains

This chapter contains the technical specifications of the active filter PQFM.
12.2 Technical specifications
The PQFM is an active filter for three phase networks with or without neutral for filtering
of non-zero sequence harmonics and reactive power compensation including balancing
between phases.
Installation location
Indoor installation on firm foundation in a clean environment
Altitude
Minimum temperature
Maximum temperature
Recommended maximum average
temperature (over 24 h)
Relative humidity
Contamination levels (IEC 60721-3-3)
Vibration (IEC 60068-2-6)
Shock (IEC 60068-2-27)
Filter installation information
Standard degree of protection
Dimensions per power unit (appr.)
Approximate weight per power unit cubicle (unpacked)
Network voltage: 208 V £ Ue £ 480 V
(Voltage group V1)
Unit rating: 70 A
Network voltage: 208 V £ Ue £ 480 V
Table 67: Technical Specifications
Nominal output at 0 to 1000m (3300ft) above sea level (for
derating refer to
-10°C (23°F) non condensing
40°C (104°F) (for derating refer to
35°C (95°F)
Max. 95% non-condensing during operation.
Max. 85% non-condensing during storage.
Chemical class 3C2 (for more information refer to
13
)
Mechanical class 3S2 (for more information refer to
13
)
Max. 0.3mm (2-9Hz)
Max. 1m/s 2 (9-200Hz)
Max. 40m/s² - 22ms
Cubicle version: IP21 (IP20 open door)
Plate version: IP00
For other protection classes see options.
W x D x H: 600 x 600 x 2150 mm (without base frame)
Plate: W x D x H: 498 x 432 x 1697 mm
Note: Tolerance between 0 and 6 mm is applicable
IP21: 260 kg
IP00: 180 kg
IP21: 260 kg
Manual Power Quality Filter PQFM ç Technical specifications 223
Table 13
)
Table 13
)
Table
Table