Philips CT5398 Service Manual page 20

Depart. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
Press Key 5
5
Press Key 5 again
Press Key 7
7
Press Key 7 again
Press Key 9
9
Press Key 9 again
8.1.4 If any of these steps failed functional, please refer to Chapter 10.
8.1.5 Perform visual check on battery connectors, car kit connectors and casing. If corrosion or deform send to
NSC for repair.
8.1.6 If the product is good, it is considered as a NFF (No Fault Found) product.
All the NFF products must be directly returned to the customer.
 PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
"MEMORY TEST"
" XXXXXXXXX "
" XXXX XXXX "
" RAM OK "
Left corner displays
" ANTENNA TST"
" Tx Level 10"
" CHANNEL 0055"
To switch DCS / GMS/ EGSM, press "C" key to toggle
Left corner displays
Rx Power Level
Use to detect Receiving Channel and its power
level
Left corner displays
COMPANY RESTRICTED
VY-V-640-P530
Page : 20 of 64
Langue : EN
Date : 21/07/03
5 MANUAL
04 AUTOTEST
01 KBD RAM
(use keys 2 & 8 to change level)
(use keys 4 & 6 for channel
selection)
7 MANUAL
06 AUTOTEST
01 KBD RAM
9 MANUAL
08 AUTOTEST
01 KBD RAM
VY-V-640-P530