Listening To Radio Broadcasts; Tuning In A Station; Preset Radio Stations - Hitachi HTD-K200E Instruction Manual

Listening to Radio Broadcasts

The unit has a built-in tuner that allows for FM radio function. The MW (AM) loop antenna
allows for MW (AM) radio function. Stations can be tuned in manually, automatically, or
from preset memory storage.
Before listening to the radio, please check that the FM antenna is correctly connected and adjusted for
length and direction or that the unit is connected to an external FM antenna. The MW (AM) loop antenna
allows for MW (AM) radio function.

Tuning in a Station

1. Press the SOURCE button on the DVD player repeatedly to select the Tuner mode or
press the TUNER button on the remote control to select tuner function.
2. Select a station using one of the following methods.
Manual Tuning
Press the TUNER+ / – on the remote control to start tuning repeatedly to change the
frequency until you find the station you want.
Auto Tuning
If you press and hold the TUNER+ / – on the remote control for one second or more, the
frequency changes down, or up, automatically until a station is found.
Preset Tuning (Possible only after presetting stations)
Press the CH–/ button or the CH+/
the desired preset number.
OR
Press the 0-9 buttons enter the preset station number.

Preset Radio Stations

You can preset up to 30 FM stations and 30 MW (AM) stations.
Automatic Preset
Press and hold the TUNER button on the remote control for two seconds to start automatic
preset programming.
Radio frequencies will be browsed and radio stations stored automatically. When all the
available radio stations are stored or all 30 memory locations are full, the auto preset
programming function will stop.
button on the remote control repeatedly to select
GB
29