Makita BPS01 Original Instructions Manual page 20

Updating the battery cartridge
settings without using the
apps
If necessary settings are saved to the adapter in
advance, the settings can be transmitted to battery
cartridges.
1. Change operation mode.
Update the PIN code and user name
Set the operation mode switch to the
Update the timer settings
Set the operation mode switch to the
2. Attach the battery cartridge to the adapter.
CAUTION: When installing battery cartridges, be
careful not to get your fingers caught between the
adapter and the battery cartridge.
Align the groove (a) on the battery cartridge with the
tongue (b) on the adapter and slide the cartridge
into place. Insert the cartridge all the way in until it
locks in place with a small click.
NOTICE: If you can see the red indicator (c) on the
upper side of the release button, the battery cartridge
is not completely locked.
The Registration or
and the adapter will beep when the transmission is
completed successfully.
NOTE: Do not detach the battery cartridge before the
adapter stops beeping.
NOTE: If the PIN codes set for the adapter and the
battery cartridge are not identical, the
lamp will flash and the settings will not be updated.
To detach the battery cartridge
Slide it from the battery dock while pressing the
release button on the cartridge.
position.
position.
Timer lamp will light up
Warning
1.
2.
b
20 ENGLISH
a
c