Related Manuals for Silver Cross 3D Pram System
Summary of Contents for Silver Cross 3D Pram System
- Page 1 3D Pram System Instructions Important: Keep for future reference Please read these instructions carefully before using your new pram Keep them in a safe place so that you may use them in the future...
-
Page 2: Table Of Contents
Your 3D Pram System is a high quality Silver Cross product. It meets current British and European safety standards and care and regular light maintenance will ensure long service. -
Page 3: Preparation For Use
1. preparatIon for uSe First check all your parts have been supplied. Your 3D Pram System includes: a. 3D Pushchair B. Pram System liner c. hood D. Raincover e. Apron Remove all packaging material from your 3D Puschair. Release the folding lock (f) by pulling up on each side of the chassis simultaneously. - Page 4 1. preparatIon for uSe Your 3D will unfold. Push down with your foot on the centre of the main lock to engage it. Ensure that the secondary locks have engaged on both sides, if not then gently push down to engage them. Your 3D Pushchair is now erected.
-
Page 5: Using Your D As A Pram
2. uSInG Your 3D aS a pram lift the leg supports to the upper position, so that they touch the bumper bar. Recline the seat to the lie flat position by releasing the mechanism at the back of the seat. Remove the head support by releasing the zip and then releasing the harness. - Page 6 2. uSInG Your 3D aS a pram Then lift up the fabric liner support which is situated under the head support cushion. Place the liner in the seat, with the frill at the bumper bar end. Pull the fabrics over and under at the handle end of the seat.
- Page 7 3D and lock the catch down. Position the rear hood skirt under the leg support joint. now attach your apron to the press studs inside the hood to enclose the pram. Your 3D Pram System is now ready for use. Warning: Do not add a separate mattress...
-
Page 8: Using Your D As A Pushchair
3. uSInG Your 3D aS a puShchaIr Attach your hood facing towards the bumper bar. The hood catches should easily 'click' into position, then push the securing catch down. Select the position you require for the seat back and the leg support. Your 3D Pushchair is ready for use. -
Page 9: Using The Brake
4. uSInG the BraKe To engage the brake, press down on either pedal. A 'click' will be heard. note: Always check that your brake is fully engaged by gently rocking the pushchair. To disengage the brake, simply push the brake pedal upwards, this will disengage both sides simultaneously. -
Page 10: Using The Harness
5. uSInG the harneSS Warning: use a harness as soon as your child can sit unaided. To release the harness press prongs and pull apart. The shoulder straps will then slide off the waist strap section Warning: always use the crotch strap in combination with the waist belt. -
Page 11: Adjusting The Seat Position
6. aDjuStInG the Seat poSItIon Your 3D has 4 seat positions To lower the seat, release the mechanism on the rear top of the seat, and gently lower to the desired position. To raise the seat place your hand in the middle of the rear of the seat and gently lift to the desired position ensuring both sides are level. -
Page 12: Operating Your Leg Support
7. operatInG Your heIGht aDjuStaBle hanDleS The handles on your 3D have positions. Press the button on the underside and raise or lower to the desired position. 8. operatInG Your leG Support Your 3D has a two position leg support for your child. -
Page 13: Operating The Swivel Wheels
9. operatInG the SWIvel WheelS Your 3D has lockable swivel wheels. By pressing the locking catch down the wheels will lock in the fixed position. By lifting this up the wheels will freely swivel for easier steering. You should always lock the wheels on uneven surfaces, and before folding. -
Page 14: Using Your Liner
11. uSInG Your lIner Your 3D liner has a Soft Wrap™ to help provide your child with a safe and comfortable position. open the wrap completely, place your child in the centre of the Soft Wrap™ and close the waist and crotch pads, securing with the velcro tabs. -
Page 15: Using Your Raincover
3D leg, just below the foot plate, and fasten. Your raincover is now fitted. Your 3D Pram System raincover is designed to fit the 3D in either pram or pushchair mode. The raincover however is not designed... -
Page 16: Folding Your D
13. folDInG Your 3D Your 3D will fold with and without the liner fitted. Although it is easier without the liner in position, and we would recommend it is removed for folding. note: If the liner is left in place and folded for a long period, then the foam mattress will curve upwards. - Page 17 13. folDInG Your 3D (cont.) Pull the handle on the main lock, and push on the pushchair handle. The 3D will begin to fold Tilt forward onto the front wheels and push down on the handles. The 3D will lock together. It may be necessary to push the pushchair together to lock when the liner is in place.
-
Page 18: Unfolding Your D
14. unfolDInG Your 3D To unfold your 3D release both handle locks. Whilst holding the handles flick the 3D forwards. Push down on the main lock with your foot. note: It is essential to ensure the main lock is engaged. Failure to do so could result in damage to your pushchair. - Page 19 14. unfolDInG Your 3D (cont.) Push the handles upwards to engage the locks. Check the secondary lock has engaged on both sides. If not push down on the tube to lock. Your 3D is ready for use. Warning: ensure that all locking devices are engaged before use.
-
Page 20: Attaching Your Ventura Plus
15. attachInG Your ventura pluS To attach your Ventura Plus, unfasten the fabric cover on the 3D arms. lift the catches inside the arms until they reach the stop point. Position the Ventura Plus in the 3D seat, do this by firstly positioning the large opening on the Ventura Plus over the bumper bar. -
Page 21: Detaching Your Ventura Plus
16. DetachInG Your ventura pluS To detach your Ventura Plus, press the buttons on both sides of the car seat handle at the same time and hold down. Rotate the handle to the upright carry position and lift the car seat out of the 3D. Push the car seat locks back into the 3D arms and re-attach the fabrics back onto the arms. -
Page 22: Safety Notes
“ To fold or unfold” instructions carefully. It may be unsafe to fit accessories or spare parts other than those supplied or recommended by Silver Cross. If anyone other than the owner is going to use the pushchair (e.g. grandparent, child minder), please show them how to use it correctly. - Page 23 Filling material(s) and covering fabric(s) meet the requirements for resistance to cigarette and match ignition in the 1988 safety regulations. CARELESSNESS CAUSES FIRE Silver Cross (UK) Ltd Micklethorn Broughton Skipton North Yorkshire BD23 3JA Telephone: 01756 702412 Website: www.silvercross.co.uk...
Need help?
Do you have a question about the 3D Pram System and is the answer not in the manual?
Questions and answers