Fitting the wheels Place the pram on its side on a clean and cushioned surface and ensure the parking device “A” is in the “off” position. Place the smaller wheel on the axle nearest the apron “B”. To attach the wheel simply pull out the metal tab “C”...
Page 3
Fitting the toy pram handle Assembly and fitting of the handle should be done by an adult. NOTE: When fitting the handle, take care to avoid damage to the paint work. WARNING: Great care must be taken not to mis-align screws ‘F’...
Page 4
Removing the wheels for maintenance To remove the wheels turn the pram on its side, ensuring that the parking device is in the “off” position. Pull out the metal tab ‘C’ and slide the wheel off axle. WARNING: Always ensure when placing the pram on its side that the surface is clean and cushioned to avoid damage to...
Page 5
The hood and apron CAUTION: Be sure that all parts of the body and clothing are clear of any moving parts. Lift hood into semi-upright position. Fix the hood in the fully open position by pushing down on levers ‘K’. WARNING: Always detach the “storm flap”...
Always allow to dry naturally, away from Complies with applicable safety standards. sunlight. Your new toy pram is a quality Silver Cross Keep the hood fully open and the apron in product. It meets current safety standards and place until completely dry.
Accessories Available Navy Pram Bag, Chrome Shopping Basket, Three Piece Bedding Set, Sun Canopy, and Rain Shield. All sold separately. silvercrossbaby.com...
Need help?
Do you have a question about the Doll’s Pram and is the answer not in the manual?
Questions and answers