Kill Switch; Electric Starter Button; Combination Switch - Husqvarna FC 250 Owner's Manual

6 CONTROLS
6.4
6.5
6.6
16

Kill switch

F00042-10

Electric starter button

S01894-10

Combination switch

H01181-10
1
Kill switch is fitted on the left side of the handlebar.
Possible states
in the basic position – In this position, the igni-
• Kill switch
tion circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
• Kill switch
is interrupted, a running engine stops, and a non-running
engine will not start.
1
The electric starter button
handlebar.
Possible states
• Electric starter button
• Electric starter button
tric starter is actuated.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated
1
when LED 1 lights up.
STANDARD with TC – STANDARD mapping with
1TC
traction control is activated when LED 1 and TC light
up.
ADVANCED – ADVANCED mapping is activated,
2
when LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when LED 2 and TC light
up.
The engine characteristic can be changed using button MAP on
the combination switch.
The launch control and the traction control can also be activated
using the combination switch.
is fitted on the right side of the
in basic position
pressed – In this position, the elec-