Email Notification - socomec NET-VISION Operating And Installation Manual

19.9. EMAIL NOTIFICATION

This page gives the description of UPS email notification settings. Email sending follows the
same rule as for TRAP management.
The first part is dedicated to Mail Server and user account if necessary.
"Mail Server"
"User Account"
"User Password"
"Sender email Address"
"Mail Subject Prefix"
"DNS Address"
"Mail Daily Status Report at (hh:mm)"
"Mail support TLS"
"Mail support authentication"
Send Test function
Once the Mail Server and account have been set and saved on NET VISION, click on
test the configuration with
Mail Type
"Events"
"Daily Status"
"Events / Status" An e-mail is sent when the event occurs with the history log file in attachment.
Event filter by severity:
: all alarms are sent via email
Information
: alarms tagged as "warning" and "critical" are sent
Warning
: only critical alarms are sent
Critical
Event filter by specific event:
Refer to SNMP TRAP event selection.
Selecting this filter means the emails are sent at the same time as SNMP TRAP.
Refer to event list for TRAP
Email Notification
Index Mail account
1
2
Note: the e-mail address length is limited to 64 characters.
NET-VISION 7 - SOCOMEC
function.
The email is sent when the event occurs
NET VISION sends a daily e-mail at defined time. This e-mail includes his-
tory log files in attachment.
Description
IP address or server full name
Needed if authentication is enabled
Needed if authentication is enabled
name@domain
Free text as mail subject
00:00
To enabled if required by e-mail server
To by enabled if user account is required
Mail Type Event Filter

None
Events
By Severity
Daily status
Events/status

None By Event
to
Event Level

Information
Warning
Critical
GB 45