Rings And Tones; Ring Cycles; Tones; Table 3.10 System Ring Cycles - Samsung OfficeServ 7070 System Description

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь
отображаться.

3.4 Rings and Tones

3.4.1 Ring Cycles

OfficeServ 7070 provides the trunk line rings, station rings, door rings, and alarm rings.
The ON/OFF cycle of each ring is shown in the table below:
Trunk line ring
Station ring
Door ring
Alarm ring
Ring ON/OFF Cycle
The ON/OFF cycle can be adjusted by changing the values of the system
database

3.4.2 Tones

The output voltage and the frequency of the ring signals in OfficeServ 7070 are as follows:

Output voltage: 75 V

Frequency: 20 Hz
OfficeServ 7070 provides the users with various tones to notify the users of the status of
functional operation and give feedback to the users. The ON/OFF cycles of currently
specified tones are shown in the table below.
Dial tone
Busy Tone
Do Not Disturb tone
Ring Back tone
Call Park tone
Confirmation/Caution/Barge-In tone
Call Back/Hold tone
Ring tone
Error/Number Unobtainable tone
Message Camp On tone
3-8

Table 3.10 System Ring Cycles

Rings

Table 3.11 Cycles of the System Tones

Tones
ON/OFF Cycles
1000/3000 ms
400/200/400/3000 ms
400/200/400/200/400/2000 ms
400/200/400/200/400/200/400/1000 ms
ON/OFF Cycles
1000/250 ms
500/500 ms
250/250 ms
1000/2000 ms
Continuous
50/50 ms
500/3500 ms
1000/2000 ms
250/250 ms
Continuous
© SAMSUNG Electronics Co., Ltd.