Connection Conditions
2.1
Secondary electrical conditions
Compliance with
The controller is tested for compliance with the environmental conditions speci-
the connection
fied below. Fault-free operation is only ensured if:
conditions
S
S
S
Danger
!
The equipment may not be commissioned until it has been clearly identified
that the machine in which the controller is installed is in full conformance with
the specifications in EC Machinery Directive 98/37/EC.
Assistance and
The connection conditions must be carefully maintained for the complete sys-
support
tem. Please contact your local Siemens office or representative for any assis-
tance.
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D Configuring Manual NCU (PHD) – 03.06 Edition
These environmental conditions are maintained when storing, transporting
and operating the equipment,
Original components and spare parts are used. This applies in particular to
the use of specified cables and plug connectors,
The equipment has been correctly mounted/installed.
2
2-19