Guidance And Manufacturer's Declaration - FujiFilm SonoSite iViz User Manual

Table 11-2: Accessories and peripherals compatible with SonoSite iViz ultrasound system
Description
SonoSite iViz base unit
SonoSite iViz battery
SonoSite iViz USB charger
SonoSite iViz protective case
P21v transducer
L38v transducer
Battery bay charger
SonoSite iViz dual charging
station
AC/DC battery supply for
battery charger
Micro USB drive

Guidance and manufacturer's declaration

WARNING
Table 11-3: Manufacturer's Declaration - Electromagnetic Emissions (IEC60601-1-2:2007, IEC
60601-1-2:2014)
Emissions Test Compliance
RF emissions
Group 1
ClSPR 11
Class A
RF emissions (SonoSite iViz
ClSPR 11 battery
charger)
136
Maximum Cable Length
No cable
No cable
4.9 ft/1.5 m
No cable
4 ft/1.2 m
4 ft/1.2 m
No cable
No cable
AC cord length=5.7 ft/1.8 m
DC cable length=6.1 ft/1.9 m
No cable
Other equipment, even equipment that complies with CISPR emission requirements, can
interfere with the SonoSite iViz ultrasound system.
Electromagnetic Environment
The SonoSite iViz ultrasound system uses RF energy only for its
internal function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
The SonoSite iViz battery charger is suitable for use in all
establishments other than domestic and those directly connected to
the public low-voltage power supply network which supplies
buildings used for domestic purposes.
Electromagnetic compatibility