Manual Operations; Operating.programs.manually; Manual.program.controls - Toro ECXTRA Installation And Operation Manual

Manual Operations

Operating Programs Manually
Note: Watering.programs.(A,.B.and.C).
can.be.operated.individually.or.set.to.run.
consecutively.in.alphabetical.order..
1.. Ensure.the.control.dial.is.in.the.
position.
2.. Position.the.
programs
program.you.wish.to.start.
3.. Press.the.
manual start
4.. To.place.additional.programs.in.queue,.
repeat.steps.2.and.3.
.
Note: When.more.than.one.program.
is.selected.to.start,.the.programs.will.
operate.one.at.a.time.in.alphabetical.order.
regardless.of.the.order.selected.
run
.switch.to.select.a.
button.two times..
Manual Program Controls
Note: During.automatic.program.operation,.
the.following.manual.controls.are.available:
wPause Watering
Press.the.+/ .and.–/
on
same time..
wResume Watering (when paused)
Press.the. button.
next
wCancel Watering
Press.the.+/ .and.–/
on
same time - two times.
wSkip Zones
Press.the. button.one.time.
next
wAdjust Zone Run Time
Press.the.+/ button.to.increase.run.time,.
on
or.the.– / button.to.decrease.run.time.
off
buttons.at the
off
buttons.at the
off
13